Rechargeable Battery Flow Measurement Devices IP68

DOF6000-P Portable Doppler Open Channel Flow Meter

The Ultraflow QSD 6537 Sensor is used to measure water velocity, depth, and conductivity of water flowing in rivers, streams, open channels and pipes. When used with a companion Lanry DOF6000 Calculator, flow rate and total flow can also be calculated.

The flow calculator can calculate the cross-sectional area of partially filled pipe, open channel stream or river, for stream or river, with up to 20 coordinate points describing the river’s shape of cross section. It is suitable for various applications

The 6537 Instrument has a 4 electrodes conductivity instrument (EC) included to measure the quality of the water, with four electrodes exposed to the water at the top of the instrument. Water quality is measured on an ongoing basis and this parameter can be recorded along with velocity and depth to better analyse the nature of the water in open channels and pipes.

Features:

• Rechargeable battery can work up to 50 hours.
• 20 coordinate points to describe cross section of the river’s shape.
• One instrument can measure the velocity, depth and conductivity simultaneously.
• Velocity Range : 0.02mm/s to 12m/s bi-directional, accuracy is 1%.
• Depth Range: 0 to 10m.
• Measure velocity in both forward flow and back flow.
• Depth is measured by both the pressure sensor and ultrasonic level sensor principles.
• With borometric and pressure compensation function.
• IP68 Epoxy-sealed body design, designed under water installation.
• RS485/MODBUS output, connect to computer directly.

Specification: Sensor

Velocity

Range Instrument range is 20mm/s - 12m/s

Ranges are software configurable.

Default range: 20mm/s to 1.6m/s unidirectional

Accuracy Typical ±1%

Resolution 1 mm/s

Depth (Ultrasonic)

Range 20mm to 2000mm/5000mm (Default 5000mm)

Accuracy ± 1% of full scale

Resolution 1 mm

Depth (Pressure option)

Range 0mm to10000mm

Accuracy ± 1% of full scale

Resolution 1 mm

Temperature

Range 0°C to 60°C

Accuracy ±0.5°C

Resolution 0.1°C

Conductivity

Range 0 to 200,000 µS/cm ± 1% of measurement

Resolution ±1 µS/cm

The EC may be recorded as a 16-bit value (0 to 65,535 µS/cm) or a 32-bit value (0 to 262,143 µS/cm)

Tilt (accelerometer)

Range ±70° in roll and pitch axes.

Accuracy ±1° for angles less than 45°

Power Requirements

Voltage range 10 to 24 V DC

Supply current 50uA standby, 150mA active for 1 second @12V

Power source 12 V DC - typically an external battery

Communications

SDI-12 Velocity, depth, temperature and diagnostic features

Connection Single cable up to 50 metres long (standard fitment is 15m)

Software Compatible with Starlog V4

Modbus (RS485)

Parameters measured by the instrument are readable

The Sonic software configuration utility can be used to configure the instrument via Modbus RS485.

Baud rate and parity are selectable

Environmental

Operating 0°C to 60°C (water temperature)

Storage -20°C to 60°C

Humidity 100 % RH

Physical

Dimensions Approximately L 135 mm, W 50 mm, H 20 mm

Material Epoxy-sealed body, stainless steel mount

Weight 200g

Cable 15 metre

Cable options User-specified, up to 50 metres

Packing & Delivery

Packing

With years of export experience along with excellent quality, advanced services and competitive prices, Lanry has won numerous customers' trust and support.With years of export experience along with excellent quality, advanced services and competitive prices, Lanry has won numerous customers' trust and support.

Delivery

High Accuracy Low Cost Wall Mount Flow Meter standard meter: 3-7 days

Special meter: pls contact us

Express, by air, by sea can be optional.