Active Member
|
[China]
Address: 8 Floor, Block C, Bldg 5, No.2800 Jiuxin Rd., Songjiang District, Shanghai,201612, China
Contact name:Tracy Xu
Lanry Instruments (Shanghai) Co., Ltd. |
|
|
Digital Handheld Ultrasonic Water Flow Meter for both clean and dirty liquids
The time difference hand-held ultrasonic flowmeter adopts the time difference working principle, the sensor tube is installed outside, no need to cut off the flow, the pipe is broken, the installation is quick, the verification and maintenance are convenient. Three pairs of large, medium and small sensors can almost measure common pipes of different diameters. Due to its small size, convenient portability, quick installation, and high cost performance, it is widely used in mobile measurement, metrology testing, data comparison and other fields.
Digital Handheld Ultrasonic Water Flow Meter for both clean and dirty liquids Features:
1.Can be used for mobile measurement, flow rate calibration, data comparing, meters running status checking.
2. Works reliably in both clean and somewhat dirty liquids with turbidity<10000ppm.
3. Lightweight and easily transportable in box.
4. Data logger function.
5. Non-invasive transducers.
Applications:
The transit-time series flowmeter is suitable for measuring relatively pure liquid in a closed full tube, and also suitable for measuring liquid with certain particles or bubbles. It is widely used in the fields of water supply and drainage, air conditioning, heating and ventilation, building energy saving, petrochemical industry, metallurgy, etc. . .
Chemical industry -chlorine, alcohol, acids, .thermal oils.etc
Water and waste water industry - hot water, cooling water, potable water, sea water etc.)
Petrochemical industry
Refrigeration and air conditioning systems
Food , beverage and pharmaceutical industry
Power supply- nuclear power plants, thermal & hydropower plants), heat energy boiler feed water.etc
Metallurgy and mining applications
Mechanical engineering and plant engineering-pipeline leak detection, inspection, tracking and collection.
General
● Support of commissioning process and installation
● Service and maintenance
● Replacement of defective devices
● Performance and efficiency measurement
- Evaluation and assessments
- Capacity measurement of pumps
- Monitoring of regulating valves
Specifications: Transmitter
| Measurement principle | Ultrasonic transit-time difference correlation principle |
| Flow velocity range | 0.01 to 12 m/s, bi-directional |
| Resolution | 0.25mm/s |
| Repeatability | 0.2% of reading |
| Accuracy | ±1.0% of reading at rates >0.3 m/s);±0.003 m/s of reading at rates<0.3 m/s |
| Response time | 0.5s |
| Damping of displayed value | 0-99s(selectable by user) |
| Liquid Types Supported | both clean and somewhat dirty liquids with turbidity <10000 ppm |
| Power Supply | AC: 85-265V Up to 14 h with fully charged internal batteries |
| Sensitivity | 0.003m/s |
| Enclosure type | Handheld, Portable |
| Degree of protection | IP65 according to EN60529 |
| Operating temperature | -20℃ to +60℃ |
| Housing material | ABS( UL 94HB) |
| Display | 4 line×16 English letters LCD graphic display, backlit |
| Units | User Configured (English and Metric) |
| Rate | Rate and Velocity Display |
Specifications: Transducer
| Degree of protection | IP65 according to EN60529.(IP67 or IP68 Upon request) |
| Suited Liquid Temperature | Std. Temp.: -35℃~85℃ for short periods up to 120℃ |
| High Temp.: -35℃~200℃ for short periods up to 250℃ | |
| Pipe diameter range | 20-50mm for type S, 40-1000mm for type M, 1000-6000mm for type L |
| Transducer Size | Type S 48(h)*28(w)*28(d)mm |
| Type M 60(h)*34(w)*33(d)mm | |
| Type L 80(h)*40(w)*42(d)mm | |
| Material of transducer | Aluminum for standard temp. sensor, and peek for high temp. sensor |
| Cable Length | Std: 5m |
Data sheet download TF1100-CH transit-time handheld ultrasonic flowmet...
Manual Download TF1100-CH transit-time handheld flowmeter Manual.p...
Dimensional Sketches
Transmitter:
Transducer:
Packing & Delivery
Clamp On Handheld Ultrasonic Flow Meter TF1100-CH for water and chilled water application
Standard meter: 3-7 days
Special meter: pls contact us
Express, by air, by sea can be optional.
