Home Companies Lanry Instruments (Shanghai) Co., Ltd.

TF1100-EC Clamp On Ultrasonic Flow Meter , Portable Transit Time Flow Meter

Active Member

Contact Us

[China]

Address: 8 Floor, Block C, Bldg 5, No.2800 Jiuxin Rd., Songjiang District, Shanghai,201612, China

Contact name:Tracy Xu

Lanry Instruments (Shanghai) Co., Ltd.

TF1100-EC Clamp On Ultrasonic Flow Meter , Portable Transit Time Flow Meter

Country/Region	china
City & Province	shanghai shanghai
Categories	Electric Saws

Product Details

Clamp On Transit-Time Ultrasonic clean water flow meter TF1100-EC

Wall-Mounted Ultrasonic Flow Meter TF1100-EC is widly used in water and waste water industry, Petrochemical industry, Chemical industry, Power supply, Food industry and so on.

This flexible and easy to use flow meter is the ideal tool for the support of service and maintenance activities. It can also be used for the control or even for the temporary replacement of permanently installed meters.

Wall-Mounted Ultrasonic Flow Meter TF1100-EC works on the transit-time method. The clamp-on ultrasonic transducers (sensors) are mounted on the external surface of the pipe for non-invasive and non-intrusive flow measurement of liquid and liquefied gasses in fully filled pipe. Three pairs of transducers are sufficient to cover the most common pipe diameter ranges.

Clamp On Transit-Time Ultrasonic clean water flow meter TF1100-EC Features

1. Non-invasive transducers are easy to install, cost effective, and require no pipe cutting or processing interrupt.
2. Wide liquid temperature range: -35℃~200℃.
3. Data logger function for this Low cost flow meter .
4. Thermal energy measurement capability can be optional.
5. For commonly used pipe materials and diameters from 20mm to over 6.0m.

6. Wide bi-directional flow range of 0.01 m/s to 12 m/s.

7. Liquid Types Supported: Both clean and somewhat dirty liquids with turbidity ＜10000 ppm.

Application

General
● Service and maintenance	Water and waste water industry - hot water, cooling water, potable water, sea water etc.)
● Replacement of defective devices	Petrochemical industry
● Support of commissioning process and installation	Chemical industry -chlorine, alcohol, acids, .thermal oils.etc
● Performance and efficiency measurement	Refrigeration and air conditioning systems
- Evaluation and assessments	Food , beverage and pharmaceutical industry
- Capacity measurement of pumps	Power supply- nuclear power plants, thermal & hydropower plants), heat energy boiler feed water.etc
- Monitoring of regulating valves	Metallurgy and mining applications
● Energy efficiency audits	Mechanical engineering and plant engineering-pipeline leak detection, inspection, tracking and collection.

Specifications :Transmitter

Measurement principle	Ultrasonic transit-time difference correlation principle
Flow velocity range	0.01 to 12 m/s, bi-directional
Resolution	0.25mm/s
Repeatability	0.2% of reading
Accuracy	±1.0% of reading at rates >0.3 m/s);±0.003 m/s of reading at rates<0.3 m/s
Resonse time	0.5s
Sensitivity	0.003m/s
Damping of displayed value	0-99s(selectable by user)
Liquid Types Supported	both clean and somewhat dirty liquids with turbidity <10000 ppm
Power Supply	AC: 85-265V DC: 24V/500mA
Operating temperature	-20℃ to +60℃
Housing material	Fiberglass
Display	4 line×16 English letters LCD graphic display, backlit
Units	User Configured (English and Metric)
Rate	Rate and Velocity Display
Totalized	gallons, ft³, barrels, lbs, liters, m³,kg
Thermal energy	unit GJ,KWh can be optional
Communication	4~20mA(accuracy 0.1%),Frequency(1-9999Hz), Relay, RS232, RS485 (Modbus),Logged data
Security	Keypad lockout, system lockout

Specifications :Transducer

Degree of protection	IP65. IP67 or IP68 according to EN60529
Suited Liquid Temperature	Std. Temp.: -35℃~85℃ for short periods up to 120℃
Suited Liquid Temperature	High Temp.: -35℃~200℃ for short periods up to 250℃
Pipe diameter range	20-50mm for type S, 40-1000mm for type M, 1000-6000mm for type L
Transducer Size	Type S 52(h)28(w)26(d)mm
	Type M 60(h)34(w)32(d)mm
	Type L 80(h)40(w)42(d)mm
Material of transducer	Aluminium for standard temp. sensor,and peek for high temp. sensor
Cable Length	Std: 10m

Datasheet Download TF1100-EC transit-time wall-mounted ultrasonic flo...

Manual Download TF-1100-EC&EI heat meter Manual.pdf

Company

Lanry Instruments Corporation is the professional manufacturer of flow detection instruments, provides one package service of research and development, production, marketing and after-sales services. Engaged in the production of flow instruments more than 20 years, Lanry has been equipped with advanced design capabilities and piled up a wealth of field application experience, which lays a solid foundation for the commitment to the promotion and innovation of high-tech system solution. The corporation has devoted to the production of flow measurement instruments with superior performance, high stability and strong reliability. Currently, Lanry Instruments has developed into two branches as Lanry Instruments (Shanghai) Co., Ltd. and Lanry instruments (Dalian) Co., Ltd, which are responsible for different areas and applications.

Packing & Delivery

Packing

With years of export experience along with excellent quality, advanced services and competitive prices, Lanry has won numerous customers' trust and support.With years of export experience along with excellent quality, advanced services and competitive prices, Lanry has won numerous customers' trust and support.