Home Companies Lanry Instruments (Shanghai) Co., Ltd.

Good Stability Ultrasonic Handheld Flow Meter IP65 For Mobile Measurement

Lanry Instruments (Shanghai) Co., Ltd.
Active Member

Contact Us

[China] country

Address: 8 Floor, Block C, Bldg 5, No.2800 Jiuxin Rd., Songjiang District, Shanghai,201612, China

Contact name:Tracy Xu

Inquir Now

Lanry Instruments (Shanghai) Co., Ltd.

Good Stability Ultrasonic Handheld Flow Meter IP65 For Mobile Measurement

Country/Region china
City & Province shanghai shanghai
Categories Camera Chargers
InquireNow

Product Details

Rechargeable Battery Handheld clamp on Ultrasonic flow meter TF1100-CH

 

Rechargeable Battery Handheld clamp on Ultrasonic flow meter TF1100-CH can measure volumetric flow of liquid within closed conduit, and there must be a certain amount of air bubbles or suspended solids in liquid.
The Ultrasonic Flowmeter also can be available with 4-20mA, Relay and OCT outputs. Liquid Types Supported Liquids containing 100ppm of reflectors and at least 20% of the reflectors are larger than 100 micron.

Handheld Ultrasonic Flowmeter Noninvasive Measure TF1100-CH works on the transit-time method. The clamp-on ultrasonic transducers (sensors) are mounted on the external surface of the pipe for non-invasive and non-intrusive flow measurement of liquid and liquefied gasses in fully filled pipe. Three pairs of transducers are sufficient to cover the most common pipe diameter ranges.

User can use hand to hold as well as to operate the flow meter main unit. This flexible and easy to use flow meter is the ideal tool for the support of service and maintenance activities. It can also be used for the control or even for the temporary replacement of permanently installed meters.

 

Rechargeable Battery Handheld Ultrasonic Flow meter TF1100-CH with clamp on sensor Features:

 

1.14 hours battery (rechargeable), back-lit 4 lines display.

2. Data logger function.

3. Wide bi-directional flow range of 0.01 m/s to 12 m/s. Wide liquid temperature range: -35℃~200℃.

4. Works reliably in both clean and somewhat dirty liquids with turbidity<10000ppm.

5. Lightweight and easily transportable in box.

6. Non-invasive transducers.

7. Can be used for mobile measurement, flow rate calibration, data comparing, meters running status checking.

 

Applications:

 

Water and waste water industry - hot water, cooling water, potable water, sea water etc.)

Petrochemical industry

Food , beverage and pharmaceutical industry

Power supply- nuclear power plants, thermal & hydropower plants), heat energy boiler feed water.etc

Metallurgy and mining applications

Mechanical engineering and plant engineering-pipeline leak detection, inspection, tracking and collection.

Chemical industry -chlorine, alcohol, acids, .thermal oils.etc

Refrigeration and air conditioning systems.

 

General

 

● Performance and efficiency measurement

- Evaluation and assessments

- Capacity measurement of pumps

- Monitoring of regulating valves

● Service and maintenance

● Replacement of defective devices

● Support of commissioning process and installation

 

 

 

Specifications: Transmitter

 

Measurement principleUltrasonic transit-time difference correlation principle
Flow velocity range0.01 to 12 m/s, bi-directional
Resolution0.25mm/s
Repeatability0.2% of reading
Accuracy±1.0% of reading at rates >0.3 m/s);±0.003 m/s of reading at rates<0.3 m/s
Response time0.5s
Sensitivity0.003m/s
Damping of displayed value0-99s(selectable by user)
Liquid Types Supportedboth clean and somewhat dirty liquids with turbidity <10000 ppm
Power SupplyAC: 85-265V Up to 14 h with fully charged internal batteries
Enclosure typeHandheld, Portable
Degree of protectionIP65 according to EN60529
Operating temperature-20℃ to +60℃
Housing materialABS( UL 94HB)
Display4 line×16 English letters LCD graphic display, backlit
UnitsUser Configured (English and Metric)
RateRate and Velocity Display
Totalizedgallons, ft³, barrels, lbs, liters, m³,kg
Size212*100*36mm
Weight0.5kg

 

Specifications: Transducer

 

Degree of protectionIP65 according to EN60529.(IP67 or IP68 Upon request)
Suited Liquid TemperatureStd. Temp.: -35℃~85℃ for short periods up to 120℃
High Temp.: -35℃~200℃ for short periods up to 250℃
Pipe diameter range20-50mm for type S, 40-1000mm for type M, 1000-6000mm for type L
Transducer SizeType S 48(h)*28(w)*28(d)mm
Type M 60(h)*34(w)*33(d)mm
Type L 80(h)*40(w)*42(d)mm
Material of transducerAluminum for standard temp. sensor, and peek for high temp. sensor
Cable LengthStd: 5m

 

Data sheet download TF1100-CH transit-time handheld ultrasonic flowmet...

Manual Download TF1100-CH transit-time handheld flowmeter Manual.p...

 

Dimensional Sketches

 

Transmitter:

Transducer:

 

 

Packing & Delivery

 

Rechargeable Battery Handheld clamp on Ultrasonic flow meter TF1100-CH

 

With years of export experience along with excellent quality, advanced services and competitive prices, Lanry has won numerous customers' trust and support. With years of export experience along with excellent quality, advanced services and competitive prices, Lanry has won numerous customers' trust and support.
 

Delivery

Rechargeable Battery Handheld clamp on Ultrasonic flow meter TF1100-CH

Standard meter: 3-7 days

Special meter: pls contact us

Express, by air, by sea can be optional.

Hot Products

Non-invasive transducers no pipe cutting Wall-mounted Transit Time Ultrasonic Flow Meter The Transit ...
Non-invasive easy to install Wall-mounted Transit-Time Ultrasonic Flowmeter The Transit Time ...
Data logger function no pipe cutting Wall-mounted Transit-Time Ultrasonic Flowmeter Ultrasonic flow ...
Wall Mounted Ultrasonic Flow Meter 0.003m/S Sensitivity The transi-time ultrasonic meter is affected ...
Waterproof Transit Time Ultrasonic Flow Meter The Transit Time Difference Correlation Principle ...
Cost effective Wall-mounted Transiit-Time Ultrasonic Flowmeter for DN20-6000mm The Transit Time ...