Tianjin Ruiyuan Electric Material Co,.Ltd |
Verified Suppliers
|
|
TRANSFORMER ENAMEL COATED COPPER WIRE 0.1-0.3MM TRIPLE INSULATED
LITZ WIRE
We may be the only one supplier who can provide class F/155 triple
insulated wire which size starts from 0.15mm. At this level, our
quality is better than Furukawa that was tested by some transofmer
manuafactures whom used triple insulated wire from Furukawa.Unlike
enameled wires, 3 layers of insulation of patented design are
extruded over the copper conductor. IEC60950 requires some
Reinforced Insulation between the primary and secondary coils. Thus
enamelled wire transformers can never omit the insulation tape or
barrier tape: enamel coatings give poor electric insulation. In
contrast, TIW can form primary and secondary coils without a need
of barrier tape or interlayer tape in-between. Each TIW wire is
equipped with a three-fold insulation around the conductor, which
has been authorized as Reinforced Insulation. As a result, the
creepage distance can never be limited and no insulation barrier is
needed, when specifying distances between termination pins and
coils.
FEATURES AND BENEFITS:
Increased efficiency
Mitigation of skin and proximity effect
Minimum eddy current losses
Lowered operating temperatures
Reduced footprint of final product
Substantial weight reduction
Avoidance of "hot spots"
APLICATION:
Transformer, motor, generator, audio coil, household application,
instruments and meters, welding machine etc..
SPECIFICATION:
Nominal conductor diameter (mm) | Typical overall diameter (mm) | Maximum overall diameter (mm) | Maximum conductor resistance (/km) | Unit Weight (kg/km) |
7/0.10 | 0.524 | 0.580 | 346.9 | 0.679 |
7/0.11 | 0.554 | 0.610 | 285.2 | 0.797 |
7/0.12 | 0.590 | 0.650 | 238.4 | 0.931 |
7/0.13 | 0.620 | 0.680 | 202.4 | 1.069 |
7/0.14 | 0.650 | 0.710 | 173.8 | 1.217 |
7/0.15 | 0.680 | 0.740 | 151.1 | 1.375 |
7/0.16 | 0.716 | 0.770 | 132.4 | 1.550 |
7/0.17 | 0.746 | 0.800 | 117.0 | 1.728 |
7/0.18 | 0.776 | 0.830 | 104.2 | 1.917 |
7/0.19 | 0.806 | 0.860 | 93.34 | 2.115 |
7/0.20 | 0.836 | 0.890 | 84.10 | 2.323 |
7/0.21 | 0.866 | 0.920 | 76.18 | 2.541 |
7/0.22 | 0.896 | 0.950 | 69.96 | 2.769 |
7/0.23 | 0.932 | 0.990 | 63.91 | 3.017 |
7/0.24 | 0.962 | 1.020 | 58.61 | 3.265 |
7/0.25 | 0.992 | 1.050 | 53.94 | 3.523 |
7/0.26 | 1.022 | 1.080 | 49.81 | 3.792 |
7/0.27 | 1.052 | 1.110 | 46.13 | 4.070 |
7/0.28 | 1.082 | 1.140 | 42.85 | 4.358 |
7/0.29 | 1.112 | 1.170 | 39.91 | 4.656 |
7/0.30 | 1.148 | 1.200 | 37.01 | 4.976 |