|
[China]
Trade Verify
Address: Room 501, Tower C, Lanhai Officec, No. 13, Changyi Road, Wuhou District, Chengdu, Sichuan, China
Contact name:Patrick Wang
Chengdu CQMEC Machinery & Equipment Co., Ltd |
|
Verified Suppliers
|
|
|
Industrial 34crm04 EN ISO9089-2 Seamless Steel Gas Cylinders Transportable
We can produce different standard cylinders for different countries. And also the size and color are wide range for customers choosing, from small size to large volume size, all can be supplied according to customers need.
Our Seamless Steel Gas Cylinders are the transportable high-pressure vessel. The product is manufactured with the most advanced technology, machinery, and equipment in the world.
Product Specifications:
| Type | Out-Diameter (mm) | Working Pressure (bar) | Test Pressure (bar) | Material | Bottom Shape | Volume (l) | Cylinder Height (mm) | Nominal Weight (kg) | Certificate |
| WGⅡ-229-(11~70)-20A | 229 | 200 | 300 | 34CrMo4 | Concave | 15 | 520 | 20 | TPED |
| 16 | 540 | 20.5 | |||||||
| 18 | 590 | 21.5 | |||||||
| 20 | 645 | 23 | |||||||
| 40 | 1180 | 37.5 | |||||||
| 50 | 1450 | 44.5 | |||||||
| WGⅡ-229-(11~70)-30A | 229 | 300 | 451 | 34CrMo4 | Concave | 30 | 950 | 43 | |
| 50 | 1510 | 64 | |||||||
| WGⅡ-267-(21~123)-20A | 267 | 200 | 300 | 34CrMo4 | Concave | 80 | 1710 | 79 | |
| WGⅡ-356-(31~156)-20A | 356 | 200 | 300 | 34CrMo4 | Concave | 80 | 1025 | 89 | |
| 140 | 1690 | 137 | |||||||
| WGⅡ-356-(28~158)-30A | 356 | 300 | 451 | 34CrMo4 | Concave | 80 | 1090 | 119 | |
| 140 | 1770 | 184 |
Application and Notes :
Here are the caveats:
(a) Cylinders must not be placed where they might form a part of any electric circuit.
(b) No attempt shall be made to transfer acetylene from one cylinder to another or to mix gases in a cylinder.
(c) Oxygen cylinders in storage shall be separated from fuel-gas cylinders or combustible materials (especially oil or grease), at a minimum distance of 20 feet or by a noncombustible barrier at least 5 feet high having a fire-resistance rating of at least one-half hour.
(d) Cylinders shall be kept far enough away from the actual welding or cutting operation so that sparks, hot slag, or flame will not reach them. When this is impractical, fire-resistant shields shall be provided.
(e) LP-Gas vessels used for roofer's tar pots, plumber's pots, and torches, space heaters, etc., shall be so installed that heat from the burner will not increase the temperature of the tank more than 10 degrees Fahrenheit after one hour of operation of the burner at full capacity.
(f) LP-Gas vessels installed on mobile equipment shall have the bottom of the container, and/or any outlet connection, not lower than the lowest horizontal edge of the vehicle axle when fully loaded. Such units shall be adequately secured to prevent jarring loose, slipping, or rotating.
