High Lumen Dimmable Led Spotlights SMD 3030 IP40 With PAR Shaped Bulbs

LED PAR20 PAR30 PAR38 SMD Light Good Heat Dispersion E27/E26/B22 Replace PAR Halogen High Lumen 3 Years Warranty

Application Of LED PAR30 PAR20 PAR38 Light:

SMD LED PAR20 PAR30 PAR38 bulbs measure just under 4 inches in diameter allowing them to fit into 4 inch recessed can lights and spotlight fixtures too small for a PAR38 bulb.

Short neck bulbs are specially designed for shallow fixtures, so these are often used for track lighting.

Some PAR30 bulbs are UL listed for wet locations, meaning they can be used outdoors and do not require protection from direct exposure to water.

Look for the Safety Rating in the Specifications of each product page if this is important to you.

Many of the bulbs are also dimmable when paired with a compatible LED dimmer.

Because not all PAR20 PAR30 PAR30 SMD LEDs work with all LED dimmers, each bulb has a Dimmer Compatibility PDF under Brochures and Spec Sheets so that you can make sure your new lights will work with your existing dimmers.

Need some help finding the right product for your installation? Give one of our lighting experts a call. We'll be happy to walk you through all of your options.

Features of LED PAR Light:

1. SMD PAR20 PAR30 PAR38 LED bulbs are an energy efficient replacement for halogen bulbs.

    To help you find the right replacement, the category is broken out by halogen wattage equivalent.

     For example, an 120 Watt Traditional Halogen Lamps is equal PAR30 LED bulb may only use 18.5 Watts for over 84% energy savings.

   While the up-front cost of LEDs is higher than halogen bulbs, they need to be replaced far less frequently.

    With halogen bulbs only lasting 1500 to 2000 hours, an LED PAR30 that lasts 35,000 hours is a worthy investment.

    You would need to replace a halogen 17-23 times before replacing one LED bulb.

2. PAR20 PAR30 PAR38 LED Lights Short Neck LED Beam Angles and Color Temperature
     PAR shaped bulbs are often used for more controlled directional lighting compared to BR shaped bulbs or for general illumination.

3. PAR30 short neck LEDs give you a wide range of options categorized as follows:

Narrow Spot: less than 10 degree beam angle
Spot: 12/24/36 degree beam angle
Narrow Flood: 25 degree beam angle
Flood: 36 degree beam angle
Wide Flood: greater than 50 degree beam angle

4.  Color temperature is a measure of how yellow or blue a light the bulb puts out.

    This is another advantage of using LED lighting over halogens, which can only produce light in the 3000 Kelvin range.

     LEDs give you more flexibility to choose how warm or cool a light to use in your displays.

     Higher Kelvin temperatures appear crisper, brighter, and are on the blue end of the Kelvin scale.      Lower Kelvin temperatures are warmer, closer to the light output from a halogen or incandescent bulb.

A 3000 Kelvin PAR30 is the closest direct replacement for halogen if you want to keep that familiar look.

We recommend 3000 Kelvin and lower for landscape lighting because flowers, grass, and trees will look unnatural under the higher Kelvin light while it matters less for statues and stonework.

For display lighting or track lighting, higher temperatures may be used, but we recommend sticking to the lower Kelvin bulbs for recessed lighting or ambient lighting.

5. High CRI Bulbs

Another measurement that changes the appearance of the light from your bulbs is CRI, a measure of how accurately a light bulb displays colors compared to the midday sun.

LED PAR Light SMD Bulbs with a higher CRI provide a more vivid light, especially reds and flesh tones.

Although LEDs cannot yet match the 100 CRI of halogen bulbs, a CRI of 90 or above is considered

excellent. For many applications, especially landscape lighting, a CRI of 80 is enough.

Product Parameter:

Pictures		Model	Power	Size(D*H)	Base	Chips	Efficiency
		SK-PAR20-001SMD-8W	8W	63.5*85.2mm	E27/E26/B22	3030SMD	>90lm/w
		SK-PAR30-001SMD-9W	9W	92*90mm	E27/E26/B22	3030SMD	>90lm/w
		SK-PAR30-001SMD-12W	12W	92*90mm Or 95*92mm
		SK-PAR30-001SMD-15W	15W
		SK-PAR30-001SMD-9W-H	9W	92*114mm	E27/E26/B22	3030SMD	>90lm/w
		SK-PAR30-001SMD-12W-H	12W
		SK-PAR38-001SMD-18W	18W	120*133mm Or 121*127mm	E27/E26/B22	3030SMD	>90lm/w
		SK-PAR38-001SMD-20W	20W

Maintenance / Repairing Instructions:
1.Make sure LED PAR20/PAR30/PAR38 Light has been turned off before maintenance or repairing.
2.Clean the LED SMD PAR Lights  cover regularly to maintain high transmission of light.
3.Clean up the LED PAR38 E27/B22/E26 Lamp dust from the cover and heatsink regularly to keep sound heat dispersion.
4.Be careful not to use water or corrosive solution for cleaning LED 20W PAR Light, preferably with a dry cloth.(It is not Waterproof tubes,These LED PAR20 PAR30 PAR38 Lights IP40, forbit to use with rainy or water).

LED PAR Lights Production Imagie: