|
[China]
Trade Verify
Address: Room 810, Unit 2, Building 5, Huixing Commercial Center, Dongsheng Road No.1, Zhongshan Dong, Shilong Town Dongguan, GUANGDONG, 523326 CN
Contact name:Anna
Guangdong Uchi Electronics Co.,Ltd |
|
Verified Suppliers
|
|
|
OBV-II100-1 data
| Uc(maximum continuous operating voltage) | 385V |
| Imax(maximum discharge current) | 100kA |
| In(nominal discharge current for class II test) | 60kA |
| Up(voltage protection level) | ≤2.2kv |
| response time | ≤25ns |
| Signal deterioration indication | red: replace green:OK |
| Housing Material | thermoplastic material |
| Housing self-extinguishing class | UL94_V0 |
| Temperature range | -40℃～+70℃ |
| humidity range | ≤95% |
| Elevational | ≤3000m |
| Method of connecting wire | Connect in Parallel |
| Mounting method | 35mm standard rail installation |
| IP(degree of protection of enclosure) | IP20 |
Advantage:
1. No continuous current problem, small leakage current
2. The product is easy to install, plug and replace the module,
with the function of anti-stolid, through different angles of the
anti-stolid jack effectively prevent different voltage modules and
the base inserted by mistake.
3. It can be used in single-phase/three-phase power supply systems through different number of combinations
Product Characteristics
1. Double row structure, one row of failure after the other still
achieve protection
2. The flow capacity is doubled, up to 100 kA
3. Built-in instantaneous overcurrent circuit breaker
4. Remote signal alarm interface
5. Pluggable replacement module
6. Failure indication
7. Response speed, nanosecond level
8. Standard modular installation
9. Built-in instantaneous overheat circuit breaker
Scope of application:
Modular large current surge protector is designed according to IEC and GB standards, and is the first level of power surge protector for power supply systems. The module is standard 35mm guide rail mounting mode. It has high discharge capacity of current. Up to 100kA (8/20us). First level surge protection of power supply for equipment systems in areas with high lightning risk.
1. The main power distribution cabinet of the building with the power supply line shielded and buried input
2. The power distribution box for the inside and outside of the building with the input line
3. Outdoor distribution cabinet/distribution box
