|
[China]
Trade Verify
Address: Room 810, Unit 2, Building 5, Huixing Commercial Center, Dongsheng Road No.1, Zhongshan Dong, Shilong Town Dongguan, GUANGDONG, 523326 CN
Contact name:Anna
Guangdong Uchi Electronics Co.,Ltd |
|
Verified Suppliers
|
|
|
1+2 class 100kA surge protector SPD
OBV-I25:
| Rated voltage(VDC) | 240/415Vac |
| Iimp(impulse discharge current for class I test) | 500KA |
| In(nominal discharge current for class II test) | 500kA |
| Up(voltage protection level) | ≤1.5kv |
| response time | ≤100ns |
| Signal deterioration indication | off-work；on-replace |
| Housing Material | Red thermoplastic material |
| Housing self-extinguishing class | UL94_V0 |
| Temperature range | -40℃～+80℃ |
| humidity range | 5%～95% |
| Elevational | ≤3000m |
| Method of connecting wire | multiple(Connect In Parallel ) |
| Thread Dimensions | 1.5mm2～35mm2 |
| Mounting method | 35mm standard rail installation |
| IP(degree of protection of enclosure) | IP20 |
Product Features:
combination type SPD
The smallest size single phase surge protector of Iimp: 50KA ；
only 27mm width, save space;
Sealed metal air gap technology,high energy electronic trigger
discharge gap, with the ability to block continuous flow
Low output residual；
fast response time (≤100ns);
lower voltage protection level ≤1.5kV
The combination type SPD characteristics:
The integrated 1+2 class surge protector is designed according to IEC and GB standards. It adopts the unique MOV and graphite gap series technology. It is suitable for 240/415VacTN, TT three-phase systems and can withstand 50KA lightning impulse current. It is usually installed in the LPZ0 area and LPZ1 area has the advantages of no leakage current, no freewheeling current, low residual voltage, monitorability, convenient installation, etc. It is widely used in distribution cabinets, distribution boxes, low-voltage cabinets, etc.
