Active Member
|
[China]
Address: 1 FUXING STREET, HANCHUAN CITY, HUBEI PROVINCE, CHINA.
Contact name:
HUBEI FUXING NEW MATERIAL TECHNOLOGY CO.,LTD |
|
|
PRODUCTS DESCRIPTION:
Smooth surface of hot dip galvanized steel wire, smooth, no crack, no section header, and no play stab wounds, galvanizing layer of uniform, high tensile strength, corrosion resistance and persistence, toughness and excellent flexibility.
Uses:
Mainly used in the communications industry, power industry, planting greenhouses, farms, cotton packing, and a spring steel wire manufacturing.
TECHNOLOGY DETAIL
Used For Stranded Conductors Of Electric Circuits
| Carbon spring steel wires | |||
| Suitable for using the springs in machinery | GB4357-89 | ||
| Diameter mm | Tensile Strength ,MPa | ||
| B | C | D | |
| 0.40 | 1910-2300 | 2250-2650 | 2600-2990 |
| 0.45 | 1860-2260 | 2200-2600 | 2550-2940 |
| 0.50 | 1860-2260 | 2200-2600 | 2550-2940 |
| 0.55 | 1810-2210 | 2150-2550 | 2500-2890 |
| 0.60 | 1760-2160 | 2110-2500 | 2450-2840 |
| 0.63 | 1760-2160 | 2110-2500 | 2450-2840 |
| 0.70 | 1710-2110 | 2060-2450 | 2450-2840 |
| 0.80 | 1710-2060 | 2010-2400 | 2400-2840 |
| 0.90 | 1710-2060 | 2010-2350 | 2350-2750 |
| 1.00 | 1660-2010 | 1960-2300 | 2300-2690 |
| 1.20 | 1620-1960 | 1910-2250 | 2250-2550 |
| 1.40 | 1620-1910 | 1860-2210 | 2150-2450 |
| 1.60 | 1570-1860 | 1810-2160 | 2100-2400 |
| 1.80 | 1520-1810 | 1760-2110 | 2010-2300 |
| 2.00 | 1470-1760 | 1710-2010 | 1910-2200 |
| 2.20 | 1420-1710 | 1660-1960 | 1810-2110 |
| 2.50 | 1420-1710 | 1660-1960 | 1760-2060 |
| 2.80 | 1370-1670 | 1620-1910 | 1710-2010 |
| 3.00 | 1370-1670 | 1570-1860 | 1710-1960 |
| 3.20 | 1320-1620 | 1570-1810 | 1660-1910 |
| 3.50 | 1320-1620 | 1570-1810 | 1660-1910 |
| 4.00 | 1320-1620 | 1570-1760 | 1620-1860 |
| 4.50 | 1320-1570 | 1520-1760 | 1620-1860 |
Tensile strength table of steel wire(Mpa)
| Group | Tensile strength |
| A1 | 1180-1380 |
| A2 | 1380-1580 |
| A3 | 1580-1780 |
| A4 | 1780-1980 |
| A5 | 1980-2180 |
| A6 | 2180-2380 |
Diameter tolerance of steel wire
| Diameter of steel wire(mm) | Grade of allowable tolerance | ||
| h10 | h11 | h12 | |
| Allowable tolerance | |||
| >0.30-0.60 | ±0.01 | ±0.02 | ±0.03 |
| >0.60-1.00 | ±0.01 | ±0.02 | ±0.03 |
| >1.00-3.00 | ±0.02 | ±0.03 | ±0.05 |
| >3.00-5.00 | ±0.02 | ±0.03 | ±0.05 |
