Active Member
|
[China]
Address: No.300 zhongshan east road,Changfa Center CFC-A 907, Nanjing,Jiangsu,210001.P.R.China
Contact name:
Jaili Machinery Co., Ltd. |
|
|
TXK chain hoist spare parts is almost all was produced by ourselves.Compared with other chinese suppliers,TXK brand electric chain hoist with below features:
1. All aluminum die-cast body,the weight is lighter .
2. Motor with cooling fan which make the hoist with longer life .
3. Motor protection : with overheating limiter
4. Brake system:side magnetic brake system / electronic magnetic brake .
5. Safety clutch for overload protection .
6. Inverter is optional .
7. Limit switch for upper and lower lifting .
8. Eaton / Schneider contactor .
9. G80/G100/Japan load chain ,even if the galvanized chain is ok
* Break System:
1. Side Magnetic Braking Device, Ensure lock the hoist
2. Mechanical braker, Dual braking system, much more safety.
* Limit Switch:
With up & down Limit Switch, to prohibit the chains from
exceeding for safety.
* Chain:
G80 Chain, Origina imported from Japan. Anti-Rust and
Anti-corrosion
* Electromagnetic contactor:
1. With Schneider Electric (TESSIC), can be used safely under high
frequency.
2. Can be installed Variable-Vrequency Drive (VFD Electric) Can be
suitable for Singlle Phase Power supply.
* Inverse phase sequence protecting device:
It is sepcial electrical installation which controls the circuit
not to work in case of wiring error in the power supply.
* Gear:
The gear made of alloy steel, Through the heat treatment.
* Level of Protection Grade(IP Grade):
1. Hoist IP Grade: IP54
2. Push Buttom IP Grade: IP65
| Double Hook Electric Trolley Chain Hoist | |||||
| Type | 0.5-01 | 01-01 | 02-01 | 03-02 | |
| Capacity(t) | 0.5 | 1 | 2 | 3 | |
| Standard Lifting Height(m) | 3 | 3 | 3 | 3 | |
| Lifting Speed(m/min) | 6.8 | 6.6 | 6.6 | 4.4 | |
| Lifting Motor | Power(kw) | 0.75 | 1.5 | 3 | 3 |
| Rotation Speed(r/min) | 1440 | 1440 | 1440 | 1440 | |
| Phases | 3 | 3 | 3 | 3 | |
| Voltage(v) | 200-660 | 200-660 | 200-660 | 200-660 | |
| Frequency(Hz) | 50/60 | 50/60 | 50/60 | 50/60 | |
| Operating Motor | Power(kw) | 0.4 | 0.4 | 0.4 | 0.75 |
| Rotation Speed(r/min) | 1440 | 1440 | 1440 | 1440 | |
| Operating Speed(m/min) | 11/21 | 11/21 | 11/21 | 11/21 | |
| Phases | 3 | 3 | 3 | 3 | |
| Volatge(v) | 200-660 | 200-660 | 200-660 | 200-660 | |
| Frequency(Hz) | 50/60 | 50/60 | 50/60 | 50/60 | |
| Chain Turns | 1 | 1 | 1 | 1 | |
| Chain Specification | Ø6.3 | Ø7.1 | Ø10.0 | Ø10.0 | |
| Test Load(t) | 0.625 | 1.25 | 2.5 | 3.75 | |
| Weight(kg) | 47 | 61 | 115 | 122 | |
| I-Beam(mm) | 58-153 | 58-153 | 82-178 | 100-178 | |
| Weight Added with 1m Higher(kg) | 0.81 | 1.1 | 2.3 | 2.8 | |
