1.Innovative electronic clutch design: press the electronic clutch
switch to unlock when
power off, then the boom can be raised up directly.
2. No limit switch design: the motor can detect the boom position
automatically.
3. Bi-direction boom holder design: left-installation and
right-installation can be exchanged easily and quickly.
4.Three springs available can extend the spring service life.
5.Auto-detect barrier close after power-on, open/close speed is
adjustable.
6. With auto-reversing on obstruction function.
7. Infrared photocell interface is available.(need to install
photocell device).
8. Loop detector interface is available, to avoid hitting the
vehicle, and control the boom falling down automatically after
vehicle passing. (need to install loop detector)9. Built-in counting function, can store the times of opening
signal, deduct the times when vehicle passing the loop, boom
falling down after vehicle passing through, well improve the
traffic efficiency.
10. Built-in delay auto-closing function, coordinated with counting
function, if the numbers of vehicle passed less than the stored
numbers, the boom will fall down automatically by countdown, but
will be new countdown if there is up or loop detector signal.
11. Integrated RS485 communication interface,to realize control of
barrier open/close by computer and barrier status query.
12. Integrated RJ45 network interface, to realize control of
barrier of barrier open/close by computer network and barrier
status query.
13.With auto-aging test function.
14.NO/NC wire control signal input are optional.