ANPR Or LPR Boom Barrier Traffic Arm Barrier Pole Gate 3-6m Length RS485

ANPR Or LPR Boom Barrier Traffic Arm Barrier Pole Gate 3-6m Length RS485

1. Revolutionary and innovative design, excellent structure, easy interchangeability between left and right directions.

2. CNC precision machining, running more smoothly and more durable.
3. The intelligent limited time motor cuts off power, the gate pole runs permanently at 90 degrees, and it has the function of rebounding when the falling pole encounters resistance, making the gate operation safer.
4. The angle sensor mode has the function of shielding ground sense at a small angle, and no safety island is required for barriers and gates.
5. Swiping card signal input, can set whether the barrier is with memory. Supports delayed rod drop function.
6. The specially designed balance structure enables the brake lever to start slowly, run quickly, and stop slowly.
7. Equipped with air switch and expansion screws, it is safe and convenient to install.
8. Flexible choice of level or switch signal output, and can be connected to a variety of control systems.
9. Optional RS485/RS232 communication module to support remote control function.

Boom gate, also known as a boom barrier, is a bar or pole pivoted to allow the boom to block vehicular access through a controlled point. Typically the tip of a boom gate rises in a vertical arc to a near vertical position. Boom gates are often paired either end to end, or offset appropriately to block traffic in both directions.