Hubei Fotma Machinery Co., Ltd. |
|
TNMA TNMC Tungsten Carbide Inserts for Cut - off / Grooving K20 K30 with CVD , PVD Coating
Brief Introduction:
FOTMA produce a complete line of cut-off / parting inserts designed to be interchangeable with GTR, GTL, and GTN. Blade-style and standard toolholders are also available.
Advantages:
Tungsten Carbide Cut - off inserts:
1. 100% virgin material
2. Efficient machining, good high-temperature stability
3. Free samples available
4. Easy to assembly, no crack or chipping
5. Superior wear resistance
6. Multi choices for grades and models
Catalogue of Tungsten Carbide Cut - Off Inserts:
TYPE | Dimension(mm) | ||||||
Insert I.C. | Groove Width | Groove Depth | |||||
TNMA-NG | Right Hand | mm | inch | mm | inch | Width(inch) | Depth(inch) |
32NGR062 | 3.175 | 0.125 | 3.175 | 0.125 | 0.062 | 0.151 | |
32NGR093 | 3.175 | 0.125 | 3.175 | 0.125 | 0.093 | 0.151 | |
32NGR125 | 3.175 | 0.125 | 3.175 | 0.125 | 0.125 | 0.151 | |
43NGR125 | 12.7 | 0.5 | 1.5875 | 0.0625 | 0.125 | 0.204 | |
43NGR156 | 12.7 | 0.5 | 1.5875 | 0.0625 | 0.156 | 0.204 | |
43NGR187 | 12.7 | 0.5 | 1.5875 | 0.0625 | 0.187 | 0.204 | |
54NG250 | 6.35 | 0.25 | 6.35 | 0.25 | 0.25 | 0.254 | |
Left Hand |
|
|
|
|
|
| |
32NGL062 | 3.175 | 0.125 | 3.175 | 0.125 | 0.062 | 0.151 | |
32NGL093 | 3.175 | 0.125 | 3.175 | 0.125 | 0.093 | 0.151 | |
32NG125 | 3.175 | 0.125 | 3.175 | 0.125 | 0.125 | 0.151 | |
43NGL125 | 12.7 | 0.5 | 1.5875 | 0.0625 | 0.125 | 0.204 | |
43NGL156 | 12.7 | 0.5 | 1.5875 | 0.0625 | 0.156 | 0.204 | |
43NGL187 | 12.7 | 0.5 | 1.5875 | 0.0625 | 0.187 | 0.204 | |
54NG250 | 6.35 | 0.25 | 6.35 | 0.25 | 0.25 | 0.254 |
TYPE | Dimension(mm) | |||||||
Insert I.C. | Groove Width | Groove Depth | ||||||
TNMC-NG | Right Hand | mm | inch | mm | inch | Width(inch) | Depth(inch) | |
32NGR062 | 3.175 | 0.125 | 3.175 | 0.125 | 0.062 | 0.151 | ||
32NGR093 | 3.175 | 0.125 | 3.175 | 0.125 | 0.093 | 0.151 | ||
32NG125 | 3.175 | 0.125 | 3.175 | 0.125 | 0.125 | 0.151 | ||
43NGR125 | 12.7 | 0.5 | 1.5875 | 0.0625 | 0.125 | 0.204 | ||
43NGR156 | 12.7 | 0.5 | 1.5875 | 0.0625 | 0.156 | 0.204 | ||
43NGR187 | 12.7 | 0.5 | 1.5875 | 0.0625 | 0.187 | 0.204 | ||
54NG250 | 6.35 | 0.25 | 6.35 | 0.25 | 0.25 | 0.254 | ||
Left Hand |
|
|
|
|
|
| ||
32NGL062 | 3.175 | 0.125 | 3.175 | 0.125 | 0.062 | 0.151 | ||
32NGL093 | 3.175 | 0.125 | 3.175 | 0.125 | 0.093 | 0.151 | ||
32NG125 | 3.175 | 0.125 | 3.175 | 0.125 | 0.125 | 0.151 | ||
43NGL125 | 12.7 | 0.5 | 1.5875 | 0.0625 | 0.125 | 0.204 | ||
43NGL156 | 12.7 | 0.5 | 1.5875 | 0.0625 | 0.156 | 0.204 | ||
43NGL187 | 12.7 | 0.5 | 1.5875 | 0.0625 | 0.187 | 0.204 | ||
54NG250 | 6.35 | 0.25 | 6.35 | 0.25 | 0.25 | 0.254 |
Material | First layer | Second layer | Third layer | Fourth layer |
Ti8 | TiN | TiC | TiCN | TiN |
TAN | TiCN | TiC | Al2O3 | TiN |
Al2O3 | TiCN | TiC | Al2O3 | / |
Suggestion: We would like recommend suitable coated material depending on your requirement. |