Active Member
|
[China]
Address: Building 3, International Enterprises Center, Guanggu Avenue 52#, Wuchang, Wuhan, China
Contact name:Pauline
Hubei Fotma Machinery Co., Ltd. |
|
|
Mo1 Mo2 Molybdenum Rod Molybdenum Bar For Steel Melting 10 - 12mm Length 330mm
Molybdenum bar is made of by material with high melting point, corrosion resistance, high density, good thermal conductivity and electrical conductivity. Molybdenum bar for steel melting is resistant to corrosion when the humidity is below 60%. However, it must be protected at elevated temperatures. Molybdenum can oxidize in the presence of oxidizing gases at temperatures above 250° C. Despite this vulnerability, Molten glass, nitrogen, inert gases, molten metals and ceramic oxides only slightly affect it.
Moly bars have high melting point so it's suitable for very high-temperature applications. It is also characterized by a uniquely low coefficient of thermal expansion and a very high level of dimensional stability.
Molybdenum bar is manufactured as random length pieces or cut to customers' desired lengths. In addition, there are three different surface processes or finishes which are provided, depending on the desired end use of the molybdenum rod.
Molybdenum Bar Introduction:
Purity: Mo 99.95%
Appearance: Silver gray metal luster
This product is made with Mo-1
The impurity content accords with GB3462-82 standard
Molybdenum products have the properties of high melting point, good thermal conductivity and low thermal expansion. At high temperature, they can resist oxidation and have high strength without any distortion during the procession, etc.
Molybdenum Material Properties:
Grade | The impurity content is not more than % | |||||||
Fe | Ni | Al | Si | Mg | C | N | O | |
Mo-1 | 0.01 | 0.005 | 0.002 | 0.01 | 0.005 | 0.01 | 0.003 | 0.008 |
Mo-2 | 0.01 | 0.005 | 0.005 | 0.01 | 0.005 | 0.01 | 0.003 | 0.02 |
Description | Code | Density g/cm3 | Dimensions (mm) | Applications |
Conventional molybdenum bars | Mo-2 | 9.3 | Square 15 x 15 x 600 Round Dia17 x 350 | Pure molybdenum bars for drawing normal molybdenum wire |
High temperature molybdenum bars | GHM | Raw material for molybdenum wire in electrical light sources and rods | ||
RGMo-2 | 9.9 | Dia(16.5-18) x (350-450) |
| |
Molybdenum bars for steel smelting | Mo-1 Mo-4 | 9.5 | 20 x 20 x 600 | With high purity, it is used as additives in steel smelting. |
Products Show:
