Hubei Fotma Machinery Co., Ltd. |
|
Tungsten Carbide Wear Parts Carbide Nozzle Parts Customized For Blasting Machine
Tungsten carbide nozzle parts have hardness at 91 HRA which is equivalent to 1500 Vickers 30. With high wear resistant at 30 times hard steel, carbide nozzle parts have good long-term dimensional stability, which makes a good material for wearing parts
We are professional manufacturer of Tungsten Carbide Tools, and can supply kinds of Carbide Nozzle parts at competitive prices.
Our Advantages:
1. Tungsten Carbide Nozzle parts always made by special material
grade chosen by particular usage.
2. Depressed sintering technology for densitification.
3. Advanded machining capacity for complicated shape and high
precision tolerances.
4. Excellent wear resistance and corresion resistance.
The Carbide Nozzles also can be made according to your own specification.
Cemented Carbide Grades for Blasting Nozzles:
Grade | Applications |
YG6 | Good hardness and normal strength, for drawing of steel and non-ferrous metal and alloy bars or tubes under the condition of higher Stress. |
YG6X | High wear resistance and high hardness,for drawing of steel wires and non-ferrous metal wires or alloy bars under low-stress condition. |
YG8 | High wear resistance and high hardness,for drawing and straightening steels,non-ferrous metal and alloy bars and tubes; And for fabricating of machine parts,tools and wear parts, such as nozzles,centres,guiding devices,upsetting dies and perforating tools. |
YG8X | Good strength and impact toughness; suitable for plates,bars,saws,seal rings,tubes etc. And it is one of the most popular grade for wear parts. |
ZK10UF | Fine-grained alloy, good wear resistance and high strength.It is one of the most popular grade for rods,bars,tubes and other wear parts, which need high wear resistance and good cautery resistance and low impact toughness. |
ZK30UF | Fine grain grade. Excellent wear resistance, high in strength and impact resistance. Suitable for rough machining of cast iron,non-ferrous metals,nonmetallic materials and heavy cutting. |
YG6N | Good wear resistance and cautery resistance, high strength and fine impact toughness. Suitable for the submarine oil pump parts such as bushes and sleeves with excellent impact toughness. |
Suggestion: We would like to recommend suitable grade depending on your machining materials. |
Size Chart of Carbide Nozzle Parts:
Chart 1
TYPE | Dimension mm | ||
ΦD | ΦD1 | h | |
06 | 4.8 | 12.7 | 4.4 |
08 | 6.4 | 12.7 | 5.1 |
09 | 7.1 | 12.7 | 5.8 |
10 | 7.9 | 12.7 | 6.6 |
11 | 8.7 | 12.7 | 7.5 |
12 | 9.5 | 12.7 | 8.5 |
13 | 10.3 | 12.7 | 9.7 |
14 | 11.1 | 12.7 | 11.1 |
15 | 11.9 | 12.7 | -- |
16 | 12.7 | 12.7 | -- |
TYPE | Dimension mm | ||
ΦD | ΦD1 | h | |
09 | 7.1 | 15.9 | 6.4 |
10 | 7.9 | 15.9 | 7.1 |
11 | 8.7 | 15.9 | 7.7 |
12 | 9.5 | 15.9 | 8.4 |
13 | 10.3 | 15.9 | 9.1 |
14 | 11.1 | 15.9 | 10.0 |
15 | 11.9 | 15.9 | 10.9 |
16 | 12.7 | 15.9 | 11.9 |
17 | 13.5 | 15.9 | 13.2 |
18 | 14.3 | 15.9 | 14.4 |
19 | 15.1 | 15.9 | 15.6 |
20 | 15.9 |
| -- |
22 | 17.4 |
| -- |
Size Drawings of the Nozzles in Above Charts:
Picture show: