17.7g/cm3 Tungsten Heavy Alloy Tablet WNiFe WNiCu 0.06mm 100mm Thickness

Tablets Tungsten Heavy Alloy WNiFe WNiCu Density 17 - 18.5g / cm3 Machined

Tungsten heavy alloy is a suitable raw material for radiation protection, as its combination of radiographic density (more than 60% denser than lead), machinability, good corrosion resistance, high radiation absorption (superior to lead), simplified life cycle and high strength. WHA typically consists of 90 to 98 wt% W in combination with some mix of nickel, iron, copper, and/or cobalt. The bulk of alloy production falls into the 90 to 95% W range. Density of WHAs varies from 17.7g/cm3 to 18.5g/cm3. 

The majority of current uses for WHAs are best satisfied with the W-Ni-Fe system. such as 93W-4.9Ni-2.lFe and 95W-4Ni-lFe represent common compositions. The addition of cobalt to a W-Ni-Fe is a common approach for slight enhancement of both strength and ductility.

The presence of cobalt provides solid-solution strengthening of the binder and slightly enhanced tungsten-matrix interfacial strength. Cobalt additions of 5 to 15% of the nominal binder weight fraction arc most common.

Introduction of Tungsten Heavy Alloy Tablets:

Standard: AMS-T-21014
Density: (17.7 - 18.5) g/cm3
Main Component: W (90 - 97)% with Ni & Fe or Ni & Cu

Thickness: 0.06mm to 100mm

Width x Length: Max 300 x 600mm

Surface Condition: Machined, Ground

Mechanical Properties of Tungsten Heavy Alloys:

AMST 21014 class 1
90%WNiFe, 90%WNiCu
Density : 17.0
Hardness: 32HRC max
Elongation: 5 - 20%

AMST 21014 class 2
92.5%WNiFe, 92.5%WNiCu
Density : 17.5
Hardness: 33HRC max
Elongation: 5 - 15%

AMST 21014 class 3
95%WNiFe, 95%WNiCu
Density : 18.0
Hardness: 34HRC max
Elongation: 3 - 10%

AMST 21014 class 4
97.5%WNiFe, 97.5%WNiCu
Density : 18.5
Hardness: 35HRC max
Elongation: 1 - 8% 

Tungsten Alloy Tablets Applications:

Protection shields for nuclear radiation.

The war industry with the ball core,the ball link.the shrapnel,the armor-piercing shell uses the ball
Balancing weights
Electrodes for Resistance Weldingt tungsten alloy 
High voltage electrical contact

Specifications of Tungsten Heavy Alloys:

Table 1. Properties of tungsten alloy ( AMS-T-21014 )

Table 2. Mechanical Properties – Minimum Value ( AMS-T-21014 )

Picture show: