Hubei Fotma Machinery Co., Ltd. |
|
Tungsten Products Pure Tungsten Round Bars With Black / Machined Surface
Features of Pure Tungsten Material
Tungsten is resistant to corrosion when the humidity is below 60%. However, it must be protected at elevated temperatures. Tungsten can oxidize in the presence of oxidizing gases at temperatures above 250° C. Despite this vulnerability, Molten glass, nitrogen, inert gases, molten metals and ceramic oxides only slightly affect it.
1. High melting point.
2. Unique low coefficient of thermal expansion.
3. The very high level of dimensional stability.
4. High Density no less than 19.1g/cm3
Surface: Black and polished
Purity: ≥ 99.95%
Density: ≥ 19.2g/cm3,
Surface roughness: < 1.6
Dia: 1.0-120mm
Standard: ASTM, GB
Tungsten Round Bars Availability
Tungsten round bar is manufactured as random length pieces or cut
to customers' desired lengths. Standard diameter and length
tolerances are listed as follows. Other, closer tolerances can be
quoted on request. In addition, there are three different surface
processes or finishes which are provided, depending upon the
desired end use.
Application of Tungsten Round Bars
The tungsten round bars are used in the manufacturing of electric light source and electric vacuum parts. They are the wonderful electric shock materials. At the meantime, the tungsten rods are used as a means of high temperature and high temperature structure parts. In the rare earth, they are also used as the electrode. The tungsten round bars are also used in the filament, cathode and components for electron tubes, electrode for the gas discharge tube and so on. They are appeared in the grid siderod, lead, support, electrode for the discharge lamp and others. Nevertheless, they can be in the grid siderod, support, lead and electrode and so on.
Specifications of Tungsten Round Bars:
Diamenter(mm) | Tolerance(mm) | |
Black rod | Ground | |
<=5.0 | ±0.5 | ±0.03 |
5 | ±0.5 | ±0.03 |
>5.0-8.0 | ±0.5 | ±0.03 |
>8.0-16.0 | ±0.5 | ±0.08 |
Material Grades Chart"
Type | Purity of Tungsten | Application |
WAL 1 | >=99.92% | filament,cathode and components for electron tubes,electrode for the gas discharge tube.etc. |
WAL2 | ||
WAL3 | >=99.92% | grid siderod,lead,support,electrode for the discharge lamp,etc. |
W1 | >=99.95% | grid siderod,support,lead and electrode,etc. |
W2 | >=99.92% |
Products Show: