Active Member
|
[China]
Address: LUKOU ECONOMIC DEVELOPMENT ZONE, ZHUZHOU CITY, HUNAN, P.R. CHINA 412100
Contact name:
JWE CARBIDE CO., LTD. |
|
|
Tungsten carbide flat bars / Tungsten carbide plates, carbide square bars or blocks, strips
| GRADE LIST | Density | T.R.S | Hardness | Performance & application recommended |
| (g/cm³) | N/mm²(MPa) | HRA | ||
| YG6 | 14.9 | 2150 | 90 | Good wear resistance, used for hard wood, used for processing original wood, aluminum section bar, brass rod and cast iron. |
| YG6X | 14.9 | 1860 | 92 | Has wear resistance higher than YG6, used for processing hard wood, original wood, aluminum section bar, brass rod and cast iron. |
| YG8 | 14.7 | 2320 | 89.5 | Wear and percussion resistance , used for processing hard wood, soft wood, ferrous and non-ferrous. |
| YS2T | 14.5 | 2350 | 92 | Fine carbide, High wear resistance, high bending strength, high resistance to bonding, high thermal strength. Machining of refractory alloys, stainless steel and high manganese steel, etc. |
| TYPE | THICKNESS (MM) | WIDTH (MM) | LENGTH ( MM) | TYPE | THICKNESS (MM) | WIDTH (MM) | LENGTH ( MM) |
| 140 * W * T | 140 | 6 | 1.5-6.0 | 230 * W * T | 230 | 8 | 2.0-6.0 |
| 140 * W * T | 140 | 8 | 1.5-.6.0 | 230 * W * T | 230 | 10 | 2.0-6.0 |
| 140 * W * T | 140 | 10 | 1.5-6.0 | 230 * W * T | 230 | 12 | 2.0-6.0 |
| 140 * W * T | 140 | 12 | 1.5-6.0 | 230 * W * T | 230 | 16 | 2.0-6.0 |
| 140 * W * T | 140 | 14 | 1.5-6.0 | 230 * W * T | 230 | 18 | 2.0-6.0 |
| 140 * W * T | 140 | 16 | 1.5-6.0 | 230 * W * T | 230 | 20 | 2.0-6.0 |
| 140 * W * T | 140 | 18 | 1.5-6.0 | 230 * W * T | 230 | 22 | 2.0-6.0 |
| 140 * W * T | 140 | 20 | 2.0-6.0 | 230 * W * T | 230 | 25 | 2.5-6.0 |
| 140 * W * T | 140 | 22 | 2.0-6.0 | 230 * W * T | 230 | 28 | 2.5-6.0 |
| 140 * W * T | 140 | 25 | 2.0-6.0 | 230 * W * T | 230 | 30 | 2.5-6.0 |
| 165 * W * T | 165 | 6 | 1.5-6.0 | 230 * W * T | 230 | 32 | 2.5-6.0 |
| 165 * W * T | 165 | 8 | 1.5-6.0 | 230 * W * T | 230 | 40 | 2.5-6.0 |
| 165 * W * T | 165 | 10 | 1.5-6.0 | 320 * W * T | 320 | 8 | 2.0-6.0 |
| 165 * W * T | 165 | 12 | 1.5-6.0 | 320 * W * T | 320 | 10 | 2.0-6.0 |
| 165 * W * T | 165 | 14 | 1.5-6.0 | 320 * W * T | 320 | 12 | 2.0-6.0 |
| 165 * W * T | 165 | 16 | 1.5-6.0 | 320 * W * T | 320 | 14 | 2.0-6.0 |
| 165 * W * T | 165 | 18 | 1.5-6.0 | 320 * W * T | 320 | 16 | 2.0-6.0 |
| 165 * W * T | 165 | 20 | 2.0-6.0 | 320 * W * T | 320 | 18 | 2.0-6.0 |
| 165 * W * T | 165 | 22 | 2.0-6.0 | 320 * W * T | 320 | 20 | 2.0-6.0 |
| 165 * W * T | 165 | 24 | 2.0-6.0 | 320 * W * T | 320 | 22 | 2.0-6.0 |
| 165 * W * T | 165 | 25 | 2.0-6.0 | 320 * W * T | 320 | 24 | 2.0-6.0 |
| ··· | ··· | ··· | ··· | ··· | ··· | ··· | ··· |
| Other types of strips may be offered according to customers' requirement. | |||||||
| STYLE | THICKNESS (INCH) | WIDTH (INCH) | LENGTH (INCH) | STYLE | THICKNESS (INCH) | WIDTH (INCH) | LENGTH (INCH) |
| STB-12 | 1/32 | 1/16 | 1 | STB-416L | 1/8 | 1/2 | 12 |
| STB-12 | 1/32 | 1/16 | 1 | STB-420 | 1/8 | 5/8 | 6 |
| STB-12A | 1/32 | 1/16 | 1-1/2 | STB-420L | 1/8 | 5/8 | 12 |
| STB-13A | 3/64 | 3/32 | 13/16 | STB-424 | 1/8 | 3/4 | 6 |
| STB-13 | 3/64 | 3/32 | 1 | STB-424L | 1/8 | 3/4 | 12 |
| STB-22L | 1/16 | 1/16 | 6 | STB-428 | 1/8 | 7/8 | 6 |
| STB-24A | 1/16 | 1/8 | 1 | STB-432 | 1/8 | 1 | 6 |
| STB-24C | 1/16 | 1/8 | 1-1/4 | STB-432L | 1/8 | 1 | 12 |
| STB-24D | 1/16 | 1/8 | 1-1/2 | STB-436 | 1/8 | 1-1/8 | 6 |
| STB-24B | 1/16 | 1/8 | 3 | STB-440 | 1/8 | 1-1/4 | 6 |
| STB-24L | 1/16 | 1/8 | 6 | STB-448 | 1/8 | 1-1/2 | 6 |
| STB-26A | 1/16 | 3/16 | 1 | STB-456 | 1/8 | 1-3/4 | 6 |
| STB-26C | 1/16 | 3/16 | 3 | STB-512C | 5/32 | 3/8 | 6 |
| STB-26L | 1/16 | 3/16 | 6 | STB-516 | 5/32 | 1/2 | 6 |
| STB-28A | 1/16 | 1/4 | 1 | STB-520 | 5/32 | 5/8 | 6 |
| STB-28B | 1/16 | 1/4 | 1-1/4 | STB-524 | 5/32 | 3/4 | 6 |
| STB-28D | 1/16 | 1/4 | 3 | STB-528 | 5/32 | 7/8 | 6 |
| STB-28L | 1/16 | 1/4 | 6 | STB-532 | 5/32 | 1 | 6 |
| STB-210L | 1/16 | 5/16 | 6 | STB-536 | 5/32 | 1-1/8 | 6 |
| STB-212L | 1/16 | 3/8 | 6 | STB-540 | 5/32 | 1-1/4 | 6 |
| STB-216L | 1/16 | 1/2 | 6 | STB-544 | 5/32 | 1-3/8 | 6 |
| ··· | ··· | ··· | ··· | ··· | ··· | ··· | ··· |
| Other types of strips may be offered according to customers' requirements. | |||||||
Production and test of Tungsten carbide strip:
1)Carbide Balls will start to prepare the powder as per the customer’s requirement with our wet-grinding machine
2) Before mass production, we need to do a trial pressing and sintering, and we check the appearances and the sizes of the samples with a micrometer to ensure that the requirements of the drawings can be met before batch production
3) Bulk production, press the raw materials to shape blanks, and carbide tips must be passed by semi-finished inspection.
4) sinter blanks to finish (HIP) and finished products inspection to ensure the best quality and production capacity.
