|
[China]
Trade Verify
Address: No. 8, Middle School Road, Baiguan Town, Lusong District, Zhuzhou, Hunan, China
Contact name:Zhang
Zhuzhou Sanxin Cemented Carbide Manufacturing Co., Ltd |
|
Verified Suppliers
|
|
|
High Accuracy Cemented Carbide Glue Gun Nozzle Head Tungsten Carbide Nozzle Tip
Zhuzhou Sanxin Cemented Carbide Manufacturing Co., Ltd.
Located at No.8 Zhongxue Road, Baiguan Town, Lusong District,
Zhuzhou 412102, Hunan, China.
It's a reliable and professional wolfram carbide nozzles, spray head parts manufacture with custom services.
This glue gun nozzle tip is made of 100% virgin tungsten carbide,
good thermal conductivity, durable and wear-resisting.
Can be produced by different size nozzles, meet your different
demand.
Special design avoid glue leaking from the nozzle. Always clean
head tips.
Key Points:
| Carbide Grade | YG8, YG10, YG15, G10, K30, K40, etc |
| Raw Material | 100% virgin tungsten carbide powder, quality Cobalt powder. |
| Processing | Sintering, Grinding, Polishinig, etc. |
| Replacement | Can be replaced |
| Requirement | Good impact resistance and wear resistance |
| Other Grade | Density(g/cm3) | Hardness(HRA) | MPa |
| KZ40C | 13.30～13.45 | 87.0～88.0 | ≥3000 |
| KZ30A | 14.03～14.17 | 88.0～89.0 | ≥3000 |
| KZ35 | 13.85～14.04 | 87.5～88.9 | ≥2800 |
| YG20 | 13.45～13.65 | ≥84.5 | ≥2480 |
| YG15 | 13.95～14.15 | ≥86.5 | ≥2400 |
| YG16C | 13.75～13.95 | ≥84.0 | ≥2640 |
| YG13C | 14.15～14.35 | ≥85.5 | ≥2450 |
Basic properties:
1. High hardness and high wear resistance
2. High elastic modulus
3. High compressive strength
4. Good chemical stability (acid and alkali corrosion, high temperature oxidation)
5. Low impact toughness
6. Low expansion coefficient. The thermal conductivity and electrical conductivity is similar to iron and its alloys.
We mainly cooperate with China national laboratories.
In April 2022, China Lunar Exploration Project, our cooperation begins with a kind of tungsten carbide drilling part for China lunar rover named 'Jade Rabbit' Chang'e-6.
The samples work well, after two months of efforts, we finally put the carbide drilling part processing out.
Real producing factory view provided.
Plastic case fancy packing, with outer carton boxes:
