|
[China]
Trade Verify
Address: No. 8, Middle School Road, Baiguan Town, Lusong District, Zhuzhou, Hunan, China
Contact name:Zhang
Zhuzhou Sanxin Cemented Carbide Manufacturing Co., Ltd |
|
Verified Suppliers
|
|
|
Customized Carbide Mold Carbide Drawing Dies For Drawing Molds Of Steel
Introduction:
The cemented carbide drawing die is one of many cemented carbide molds. The working part of the die is made of hard alloy. The fixed part is made of 45# steel. And then the two are assembled together, which can minimize the material cost and truly save money for customers.
Technical parameters:
Technical parameters of cemented carbide drawing die
| Grade | Density: g/cm³ | Bending strength: TRS | Hardness: HRA or HV | Porosity | Performance and application |
| SXL03 | 14.95～15.11 15.15～15.35 | 1130~1300 | 91.5 | with good wear resistance, mainly used to make small-sized drawing molds. | |
| SXL06 | 14.88～15.04 14.85～15.05 14.0～14.95 | 1530~1550 1580 | 89.5 | 2.0~1.6 | With good wear resistance, used for drawing molds of steel with drawing diameter of 20mm or less, and of carbide, non-ferrous metals and carbide wires or bars under 35mm. |
| SXL08 | 14.65～14.85 14.65～14.85 | 1840~2100 | 89.0 | 2.0~1.6 | With good toughness and wear resistance, used for drawing molds of steel with drawing diameter of 50mm or less, and of carbide, non-ferrous metals and carbide wires or bars under 30mm. |
| SXL30 | 14.29～14.49 | 1910 | HV:1210 | With excellent strength and toughness, mainly used for drawing molds for workpiece pipes and rods. | |
| SXL50 | 13.86～14.06 13.95～14.15 | 2060~2220 | 86.5 | With excellent strength and toughness, mainly used for drawing molds for workpiece pipes, rods and plates.
|
Advantages:
The professional material engineer selects the material grade and superfine particle raw powder according to your requirements.
Advanced precision processing equipment + unique process.
High wear resistance, long service life, greatly reducing the frequency of edge grinding and maintenance.
