|
[China]
Trade Verify
Address: Block B, building 4, Area B, Hi Tech New Makin Valley Xiangyuehuan Road, Tianyuan District, Zhuzhou, Hunan, China
Contact name:Ms Pan
Zhuzhou TGC Cemented Carbide Co.,Ltd. |
|
Verified Suppliers
|
|
|
YG11C High toughness Tungsten carbide studs for ball milling
Product details:
OD 16mm
Height 40mm
SR8 dome studs with chamfer R1.0
| Grade | Density | Hardness | T.R.S. | Recommended Applications |
| YG11C | 14.5 | 86.5 | 2800 | With good wear resistance, excellent impact and shock resistance, suitable for all kinds of carbide wear part, such as carbide gear wheel, carbide farm cutter, mining crushing machinery and so on. |
Regular sizes for tungsten carbide stud:
| Diameter | Height | Dome | Chamfer E×R |
| 20 | 40 | SR10 | 2×R5.0 |
| 20 | 30 | SR10 | 2×R5.0 |
| 20 | 35 | SR10 | 2×R5.0 |
| 16 | 55 | SR8 | R2.0 |
| 16 | 50 | SR8 | R2.0 |
| 16 | 45 | SR8 | 2×R5.0 |
| 16 | 40 | SR8 | 2×R5.0 |
| 16 | 40 | SR8 | 1×R2.0 |
| 16 | 40 | SR8 | 1×45° |
| 16 | 35 | SR8 | R2.0 |
| 16 | 20.5 | SR8 | R2.0 |
| 10 | 22 | SR5 | R1.0 |
| 10 | 22 | SR5 | R1.5 |
| 10 | 20 | SR5 | R1.5 |
| 8 | 20 | SR4 | R1.0 |
1. Various sizes for grinding roller carbide pin have been on to the High pressing
2. Grinding roller, its attachment on the high pressing
3. It can help the surface to use more extended time. This is the abrasive wear-resistant stud for the grinding roller.
HPGR or high-pressure grinding rolls have made extensive progress in non-ferrous metal mining. The technology is now widely seen as an alternative to primary milling, with a number of large units coming into use in recent years. Following these developments, HPGR-based circuit configurations are often the base case for certain ore types, such as very hard abrasive ores.
