|
[China]
Trade Verify
Address: Block B, building 4, Area B, Hi Tech New Makin Valley Xiangyuehuan Road, Tianyuan District, Zhuzhou, Hunan, China
Contact name:Ms Pan
Zhuzhou TGC Cemented Carbide Co.,Ltd. |
|
Verified Suppliers
|
|
|
Coarse Grain Size Tungsten Carbide Button Bits For Drilling Medium
Hard Rock Formation
Conical button bits:
Diameter: 15.0mm
d: 8.8mm
H: 11 mm
h1: 1
h2: 3.5
Grade Details:
Density 14.7.0
Hardness HRA 88.5
T.R.S 2400
Grain size Coarse
ISO Grade K30
Road Breaking Carbide Button Bits
| TYPE | Dimension (mm) | |||||||
| D | d | H | h1 | h 2 | α1 | α2 | α3 | |
| WLCC1511 | 15 | 8.8 | 11 | 1 | 3.5 | 95 | 126 | 30 |
General Tungsten Carbide Button Bits:
| Carbide Grade | Density g/cm3 | T.R.S MPa | Hardness HRA | Recommended Performance & application |
| TGC1 | 15.1 | 1800 | 90 | Mainly used as small buttons for percussion bits to cut soft and medium-hard formations. |
| TGC2 | 14.95 | 1900 | 90.5 | For coring crowns, electric coal drill bits, coal cutting picks, oil cone bits, and scraping knife bits, are used in geological prospecting, coal mining, and oil well boring. |
| TGC3 | 14.8 | 2200 | 89.5 | For coring crowns, electric coal drill bits, coal cutting picks, oil cone bits, and scraping knife bits, are used in geological prospecting, coal mining, and oil well boring. |
| TGC4 | 14.95 | 2500 | 90.5 | Mostly used as the buttons of small and medium-sized percussion bits and as the inserts of rotary prospecting bits to cut soft and medium-hard formations. |
| TGC5 | 14.6 | 2450 | 87.6 | Suitable to strips, conical buttons for rotary percussion-resistant, geological prospection buttons, cut soft and medium-hard formations. |
| TGC6 | 14.4 | 2500 | 86.8 | Primarily for the buttons and inserts of rotary percussion bits to cut medium-hard and hard formations. |
| TGC7 | 14.4 | 2550 | 87.2 | Primarily for the buttons and inserts of rotary percussion bits to cut medium-hard and very hard formations. |
| TGC8 | 14.4 | 2700 | 86.5 | Largely for the inserts and buttons of percussion bits and tri-cone bits to cut medium-hard, hard, and very hard formations. |
| TGC9 | 14.2 | 2850 | 86 | Primarily for the buttons of tritone bits and inserts of rotary percussion bits to cut hard and very hard formations. |
| TGC10 | 14 | 3000 | 85.5 | For oil cone drill bits, for medium-soft and medium-hard rocks. |
Advantages:
Our carbide button bits range:
