Active Member
|
[China]
Address: Building E5, Yunlong Headquarters Economic Park, Yunlong New District, Zhuzhou, Hunan, China
Contact name:Lena Zheng
Zhuzhou Golden Ants New Material Co.,Ltd |
|
|
Customized Size Tungsten Carbide Valve High Bending Strength For Machinery Industry
Features of Tungsten carbide valve seat
We are offering tungsten carbide valve seats for the application of wear in assembly of Gas Lift Valves, Wire Line Retrievable (WLR) Injection pressure operated (IPO) gas lift valves in Oil & Gas Ind. These are made to perfect sizes in controlled tolerances in order to fit during assembly.
Application:
Controlling fluid handling and flow control devices
Salient Features:
1.High wear resistance grade
2.Precise control on dimension
3.Last longer due to its special properties to suit application
Advantages of our carbide products
1. professional manufacturer
2. stable and reliable quality, long life time
3. good abrasive and corrosion resistance
4. high quality and high hardness
5. made from of 100% virgin materials, without recycled materials
6. all products go through in-process and final inspection
7. optional grade: YG6, YG8C, YG9C, YG10C, YG11C, YG13C, YG15C, K10, K15, K20, K30, K35, etc.
Packaging
1,Hard Cardboard with fillings and wooden case
2,Blank mark,code bar and marked as your requirements on hard cardboard
3,Discuss,customize package with your requirements
Shipping
There are three ways to be choose, as follows:
1,International Express: UPS,TNT,DHC
2,Port transportation: all ports,by sea,on air
3,We delivery products according to customer’s requirements
4,take insurance for the goods according to contract
Product specification:
| Grade | Physical and mechanical properties | Applications recommended | ||
| Density g/cm3 | Hardness No Less Than HRA(HV) | TRS No Less Than (Mpa) | ||
| YG3 | 15.10~15.30 | 92.5 | 1700 | Superior wear resistance only less than YG3X, sensitive to impact and vibration, suitable for cast non-ferrous metal and its alloy finish turning, semi-finish turning, thread finish turning and hole expanding. |
| YG3X | 15.10~15.30 | 93.6 | 1450 | Best wear resistance in Tungeten and Cobalt alooy, but not good in anti-impact proprety, suitable for cast iron, non-ferrous and alloy, quenched steel, alloy steel small cutting section machining at high speed. |
| YG6 | 14.80~15.00 | 91.1 | 2100 | High wear resistance but less than YG3, better anti-impact and anti-vibration than YG3X, Suitable for cast iron, non-ferrous and alloy, non-metal material semi-finish machining and finish machining. |
| YG6X | 14.80~15.00 | 92.4 | 2000 | Belong to small granule Tungsten carbide alloy, wear resistance higher than YG6. Suitable for machining cold and hard alloy cast iron and heat resistance alloy steel, as well as finish machiing for normal cast iron. |
| YG8 | 14.6~14.80 | 90.5 | 2300 | High bending strength resistance, better anti-impact and anti-vibration than YG6, suitable for cast iron, non-ferrous and alloy, non-metal material rough machining at low speed. |
Zhuzhou Golden Ants tungsten carbide tools , made from 100% virgin raw materials. It can be used in wide application field. Zhuzhou Golden Ants tungsten carbide tools , good red hardness,excellent wear-resistance, high elastic modulus and compressive strength. The chemical properties of our tungsten carbide tools is stable, also the impact toughness & dialatation coefficient is low. The heat-conducting property and electrical conductivity of tungsten carbide tip is close to iron or iron alloy.
It is a very good material to produce the parts to resist high temperature & corrosion, also it is widely used as wear parts and shielding parts. We provide you tungsten carbide tools which can enhance your productivity and save your cost.
FAQ:
Q: Are you trading company or manufacturer ?
A: We are manufacturer of tungsten carbide since 2006. We can supply 20 tons tungsten carbide product per month. We can provide customized carbide products as per your requirements.
Q: How long is your delivery time?
A: Generally,it will take 7 to 25 days after order confirm.The specific delivery time depends on the specific product and the quantity you needed.
Q: Do you provide samples? iIs it free or charged?
A:Yes, we can offer a sample for free charge but the freight is at customers’ cost.
Q. Do you test all your goods before delivery?
A: Yes, we will do 100% test on our cemented carbide products before
delivery.
