Active Member
|
[China]
Address: NO.88 Kaide Road,Hetang District,Zhuzhou City,Hunan Province,China
Contact name:Zhou
Zhuzhou HGtool Tungsten Carbide Co.,Ltd. |
|
|
Tungsten Carbide Heavy Turning CNC inserts LNUX191940 for train wheel hub
Product description
CNC blade is the floorboard of the indexable turning blades, is the mainstream of modern metal cutting applications of products are mainly used in metal cutting milling cutting cutting thread turning areas such as the material can be divided into the coating blade metal ceramic blade ceramic knife carbide blade super-hard etc. Its characteristic is high efficiency high wear-resisting, than traditional welding blade alloy blade processing efficiency more than four times as coating technology advances, the key technology of wear-resistant high temperature resistant breakthrough will further improve the efficiency and reduce the processing cost.
Grade and Applications
It is suitable for finishing of steel, cast steel and stainless steel.Suitable for semi-finishing of iron, nickel superalloy, cod hard cast iron, non-ferrous metal, heat-resistant alloy, titanium alloy, aluminum alloy, ordinary alloy steel, etc.
| ISO Code | Grade | Physical and mechanical properties | Applications recommended | ||
| Density g/cm3 | Hardness HRA(HV) | TRS Mpa | |||
| K05 | YG3 | 15 | 90.5 | 1300 | Suitable for finishing of cast iron and nonferrous metal. |
| K10 | YG6X | 14.8 | 91 | 1560 | The finishing& semi-finishing of cast iron and nonferrous metals and also for the machining of manganese steel and hardening steel. |
| YG6A | 14.7 | 91.5 | 1510 | ||
| K15 | YG6 | 14.9 | 89.5 | 1670 | Suitable for the roughing of cast iron and light alloys and also for the milling of cast iron and low-alloy steel. |
| M05-10 | YS8 | 13.9 | 92.5 | 1720 | It can be used for the finishing of iron based and nickel based high-temperature alloys and high-strength steel and it can also be used for the finishing of chilled cast iron, heat resistant stainless steel, high maganese steel and bardened steel |
| M10 | YW1 | 13 | 91 | 1290 | Suitable for finishing and semi-finishing of stainless steel and conventional alloy steel |
| YW3 | 12.9 | 92 | 1390 | ||
| YW4 | 12.3 | 92 | 1390 | ||
| M20 | YW2 | 12.9 | 90.5 | 1460 | The grade can be used for the semi-finishing of stainless steel and low-alloy steel and it is mainly used for the machining of railway wheel hubs. |
| P10 | YT05 | 12.6 | 92.5 | 1260 | Suitable for the finishing and semi-finishing if steel and cast steel with a moderate feed rate and a rather high cutting speed. |
| YT15 | 11.3 | 91 | 1300 | ||
| P20 | YS14 | 11.4 | 91.5 | 1550 | Suitable for the finishing and semi-finishing of steel and cast steel. YS25 is specially used for the milling of steel and cast steel. |
| YT14 | 11.4 | 90.5 | 1400 | ||
| YS25 | 13 | 90.5 | 1780 | ||
| P30 | YC30S | 12.9 | 90.5 | 1600 | used for the milling of steel, cast steel and alloy steel |
Reference Drawing
Products show
