Zhuzhou HGtool Tungsten Carbide Co.,Ltd. |
|
YBC151 Tungsten Carbide Railway inserts for heavy turning 175.32-191940-22
Grade and Applications
YBC151
The substrate combined with the coating has excellent wear resistance, which is composed of mt-ticn and thick layer Al2O3Tin makes it suitable for finishing steel.
YBC251
The substrate has good toughness and high safety cutting edge, with the best combination of coatingComposed of mt-ticn, thick layer Al2O3 and tin, suitable for semi-finishing of steel
YBC152
Thick TiCN and thick Al2O3 coatings enhance impact toughness and wear resistance, making them suitable for high-speed finishing and semi-finishing of steel.At the same cutting speed, cutting speed can be increased by more than 25%, tool life can be increased by more than 30%.
ISO Code | Grade | Physical and mechanical properties | Applications recommended | ||
Density g/cm3 | Hardness HRA(HV) | TRS Mpa | |||
K05 | YG3 | 15 | 90.5 | 1300 | Suitable for finishing of cast iron and nonferrous metal. |
K10 | YG6X | 14.8 | 91 | 1560 | The finishing& semi-finishing of cast iron and nonferrous metals and also for the machining of manganese steel and hardening steel. |
YG6A | 14.7 | 91.5 | 1510 | ||
K15 | YG6 | 14.9 | 89.5 | 1670 | Suitable for the roughing of cast iron and light alloys and also for the milling of cast iron and low-alloy steel. |
M05-10 | YS8 | 13.9 | 92.5 | 1720 | It can be used for the finishing of iron based and nickel based high-temperature alloys and high-strength steel and it can also be used for the finishing of chilled cast iron, heat resistant stainless steel, high maganese steel and bardened steel |
M10 | YW1 | 13 | 91 | 1290 | Suitable for finishing and semi-finishing of stainless steel and conventional alloy steel |
YW3 | 12.9 | 92 | 1390 | ||
YW4 | 12.3 | 92 | 1390 | ||
M20 | YW2 | 12.9 | 90.5 | 1460 | The grade can be used for the semi-finishing of stainless steel and low-alloy steel and it is mainly used for the machining of railway wheel hubs. |
P10 | YT05 | 12.6 | 92.5 | 1260 | Suitable for the finishing and semi-finishing if steel and cast steel with a moderate feed rate and a rather high cutting speed. |
YT15 | 11.3 | 91 | 1300 | ||
P20 | YS14 | 11.4 | 91.5 | 1550 | Suitable for the finishing and semi-finishing of steel and cast steel. YS25 is specially used for the milling of steel and cast steel. |
YT14 | 11.4 | 90.5 | 1400 | ||
YS25 | 13 | 90.5 | 1780 | ||
P30 | YC30S | 12.9 | 90.5 | 1600 | used for the milling of steel, cast steel and alloy steel |
Company video
Reference Drawing
Products show