Active Member
|
[China]
Contact name:Yeva.Yang
Zhuzhou Gingte Cemented Carbide Co.,LTD |
|
|
Product decription :
Mechanical seal ring are used to seal the clearance between the
rotating shaft and the stationary housing in equipment .
Tungsten carbide is the most excellent seal face material in the
seal material world.
One of main reasons for using Tungsten Carbide is the additional
wear resistance that can be achieved in both moving and static
parts.
This is particular the case in serve service conditions, such as
high temperature,and high levels of corrosion and abrasion.
Features:
1. Corrosion resistance, wear resistance,High pressure resistance.
2. Long service life.
3. Excellent performance, high cost performance.
4. High dimensional accuracy.
5. Quality and performance stability.
| Product Name | Tunsten Carbide Roll Ring |
| Material | cemented carbide |
| Size | φ145*φ92*25 or others available |
| Size Tolerance | Free tolerance or as customer's request |
| Color | Ground |
| Recommend Grade | YG6 YG10 YG15 or others |
| Grain Size | Medium Grain and fine grain |
| Application | For sealing |
| Processing Treatment | Clean ground |
| Product Features | Long life, good impact resistance |
| Certification | ISO9001 |
Grade Performance:
| Tungsten Carbide Roll Ring | |||||
| Grades | Density | T.R.S | Hardness | Performance & application recommended | |
| g/cm³ | MPa | HRA | |||
| YG11 | 14.4 | ≥3000 | 88.5 | Forming or stamping dies for metal powders and nonmetal powders. | |
| YG15 | 14 | ≥3400 | 87.5 | For fabricating drawing dies of steel tubes and rods under High compressibility ratio; punching, stamping, forging tools under large stress. | |
| YG20 | 13.5 | ≥3800 | 85.5 | For fabricating of stamping dies for watch parts, spring plates of musical instruments, battery jars, small sized steel balls, screws, screw caps. | |
| YG15C | 14 | ≥4000 | 86.5 | For oil cone drill bits,cut medium soft and hard rocks;debarking and cutting of frozen wood,soft wood and original wood. | |
| YG16C | 13.9 | ≥3500 | 85.5 | Impact resistance forging dies. | |
Size Options:
| Outer Diameter (mm) | Inner Diameter (mm) | Thickness (mm) |
| φ90~φ318 | φ3~φ280 | 10~100 |
| … | … | … |
For any other sizes we are able to custom-made according to clients’ requirements or drawings.
Packing Process:
FAQ:
Q: Are you trading company or manufacturer ?
A: We are factory.
Q: How long is your delivery time?
A: Generally it is 3-5 days if the goods are in stock. or it is 15-25 days if the goods are not in stock, it is according to quantity.
Q: Do you provide samples ? is it free or extra ?
A: Yes, we could offer the sample for free charge but do not pay the cost of freight.
Q: What is your terms of payment ?
A: Payment<=1000USD, 100% in advance. Payment>=1000USD, 30% T/T in advance ,balance before shippment.
