High Quality High Toughness Screw Die Carbide Die Shear Die Mold Polished
Insert Material:
We can suggest different carbide material according to different usage.
| Item | Co | Grain Size | Density | Hardness | TRS | Impact Strength | Application |
| | Co% | μm | g/cm² | HRA | Kgf/mm² | Kgf/m-cm² | |
KG2 | 6.50% | 2~3 | 14.90 | 90.5 | 320 | 0.28 | Drawing die |
KG3 | 9% | 2~3 | 14.61 | 89.3 | 340 | 0.52 | Extrusion die |
KG5 | 12% | 2~3 | 14.31 | 88.3 | 340 | 0.58 | Extrusion die |
KG6 | 14% | 2~3 | 14.12 | 87.3 | 320 | 0.65 | Extrusion die |
Coarse-Grained | ST6 | 15% | 3~6 | 13.80 | 86.0 | 270 | 0.78 | Stainless steel |
ST7 | 20% | 2~6 | 13.40 | 85.3 | 270 | 0.80 | Stainless steel |
EA65 | 18% | 2~6 | 13.73 | 85.0 | 300 | 0.80 | Carbon steel screw/cutting die |
VA80 | 20% | 3~6 | 13.58 | 84.0 | 280 | 0.85 | Impact resistance |
VA90 | 22% | 6~9 | 13.39 | 82.5 | 240 | 0.90 | Impact resistance |
EA90 | 24% | 2~6 | 13.22 | 82.8 | 270 | 0.90 | Impact resistance |
Case Material:
Our main case material is H13(SKD61) HRC46-48
SKD61(H13) | | | | | | | | |
Chemical Composition | C | Si | Mn | P | S | Cr | Mo | V | W |
Content (%) | 0.39 | 1.15 | 0.44 | 0.021 | 0.007 | 5.12 | 1.3 | 0.94 | 0.06 |
| Cu | Ni | | | | | | | |
| 0.05 | 0.06 | | | | | | | |