|
[China]
Trade Verify
Address: Hailong Village, Baishiyi Town,Jiu Long Po District,Chongqing,China
Contact name:Robin
Chongqing Henghui Precision Mold Co., Limited |
|
Verified Suppliers
|
|
|
China Supplier High Quality Carbide Wire Drawing Die
Product show:
1. Structure of dies:
The hole of the wire drawing dies is made up of four parts:
•Lubricating area of the entry: There is an arc to make the wires enters to the workaround conveniently.
•The workaround: The metals come about plastic deformation while drawing, the cross section of the metals is compressed and reduced.
•Diameter fixed district: to guarantee the size and form accurate and even, lengthen the service life of the die.
•Wire outlet area: wire outlet terminal can prevent scuffing and break-up when the machine is stopped.
2. The production and delivery will take 15 days.
the whole set of dies can guarantee drawing 30000tons of copper wires. It can reduce the copper powder in the course of drawing. The surface of finished wires is smooth without any defect. After the dies drawing copper wires of 30000 tons, it will not be damaged, but it needs to safeguard, maintain, and polish.
3.Applications:
Drawing dies are typically used in the drawing of wire, rod, bar, and tube. The materials that are drawn are typically copper alloys, aluminum alloys, and steel alloys.
4.Configurations:
Round Drawing Dies
Hexagon Drawing Dies
Square Drawing Dies
Rectangle Drawing Dies
Custom Shapes
Drawing Dies Parameters(unit: mm)
Hole SizeΦd | Hole Size | Ovality | Casing |
Φ0.501~0.750 | ≤0.0030 | ≤0.0020 | Φ30×10 |
Φ0.751~1.50 | ≤0.0035 | ≤0.0025 | Φ37×12 |
Φ1.501~2.00 | ≤0.0050 | ≤0.0030 | Φ37×12 |
Φ2.001~3.00 | ≤0.0070 | ≤0.0050 | Φ41×20 |
Φ3.001~4.60 | ≤0.010 | ≤0.0080 | Φ41×20 |
Φ4.601~8.00 | ≤0.015 | ≤0.012 | Φ41×24 |
