ZHUZHOU SEEGO CARBIDE TOOLS CO., LTD. |
|
Tungsten Carbide End Mill for High Temperature Milling Cutting
Advantages:
1. With excellent rigidity, tooling can conduct highly efficient
machining.
2. Generalhigh precision prodcut, surface finished <Ra0.15um
3. Adopting advanced power high speed CNC grinder to make high
precision profile grinding, it has perfect blade quality &
precision tolerance.
4. Inclinationnumber of flute (2-flute-6-flute)type of
holderhelical angleflute lengthholder diameteroverall length etc
can be machined according to requirements.
Discription:
We are professional munufaturer and supplier for a ranges of high
performance solid carbide end mills, drills, reamers in ultra micro
grain tungsten carbide materials.
Applications: for Aluminum,Copper,Iron,Ordinary Steel,Heat
Resistant Steel,Stainless Steel,Ti Alloy.
An End Mill is a type of milling cutter designed to be held by the
shank on one end in order for it to cut with the opposite end. The
advantage to an End Mill is that, unlike any other type of milling
cutter, it is capable of cutting on the periphery, the face or the
end of the cutter. our offering of End Mills is extensive-ranging
Solid Carbide Roughing & Finishing Mills to application and
material specific tools employing the latest geometries and coating
technologies all resulting in improved efficiency and productivity
for you. The number of flutes can range from two to eight. The
fewer flutes offer the most efficient chip removal, but a higher
amount of flutes provide a smoother finish. The End Mill’s helix
angle is also important. Most general purpose End Mills have a
30-degree helix angle because it is halfway between “slow”
(low-angle) and “fast” (high-angle) helix End Mills.
Specifications of corner radius head End Mills:
Description | D | Lc | L | d | R | z |
Standard Length | 1.0~6.0 | 3.0~16.0 | 50 | 4~6 | 0.0~2.0 | 2 |
8.0 | 20 | 60 | 8 | 0.3~2.0 | 2 | |
10.0~12.0 | 25~30 | 75 | 10~12 | 0.3~3.0 | 2 | |
16.0 | 36 | 100 | 16 | 1.0~3.0 | 2 | |
With Long Shank Length | 6.0 | 15 | 785 | 6 | 0.5~1.5 | 2 |
8.0~12.0 | 20~30 | 100 | 8~12 | 0.5~2.0 | 2 | |
16.0 | 36 | 150 | 16 | 0.5~2.0 | 2 |
Standard Length | 2.0~6.0 | 6.0~16.0 | 50 | 4~6 | 0.1~0.5 | 3 |
8.0 | 20 | 60 | 8 | 0.5~1.0 | 3 | |
10.0~12.0 | 25.0~30.0 | 75 | 10~12 | 0.5~2.0 | 3 | |
16.0~20.0 | 16.0~45 | 100 | 16~20 | 0.5~4.0 | 3 |
Standard Length | 1.0~6.0 | 3.0~16.0 | 50 | 4~6 | 0.0~2.0 | 4 |
8.0 | 20 | 60 | 8 | 0.3~2.0 | 4 | |
10.0~12.0 | 25~30 | 75 | 10~12 | 0.3~3.0 | 4 | |
16.0 | 36 | 100 | 16 | 1.0~3.0 | 4 | |
With Long Shank Length | 6.0 | 15 | 785 | 6 | 0.5~1.5 | 4 |
8.0~12.0 | 20~30 | 100 | 8~12 | 0.5~2.0 | 4 | |
16.0 | 36 | 150 | 16 | 0.5~2.0 | 4 |
Coating:
Coating Sheet | |||||
Coating Type | TiAIN | ALTiN | TiSiN | Nano | |
Hardness(HV) | 2800 | 3200 | 3600 | 42(GPA) | |
Thickness(UM) | 2.5-3 | 2.5-3 | 3 | 3 | |
Oxidation Temp(°) | 800 | 900 | 1000 | 1200 | |
Friction Coeffient | 0.3 | 0.3 | 0.45 | 0.4 | |
Color | Violet | Black | Copper | Blue |
TiAIN
A special multilayer coating for edge retention and corrosion
resistance when used on a wide range of materials including iron
based, hardened steels, and stainless steels. Typically TiAIN is
used in applications with lower cutting speeds than TiSiN and ALTiN
but often improves the tool's lifetime by a factor of three or
more.
ALTiN
A general purpose coating that offers improved wear resistance to
abrasive, adhesive, or difficult to machine materials such as cast
iron, aluminum alloys, steels, copper and more. This is a common
used substitute when the advantages of TiAIN cannot be used, as in
applications that cannot generate the speeds and feeds required for
higher cutting temperatures. ALTiN is harder and more impact
resistant than TiAIN and can improve tool life.
TiSiN
This is a high performance coating for milling, tapping and
drilling in stainless steels, carbon steels, alloy steels, and cast
iron. This coating is extremely heat resistant and can be used with
or without coolant. It is exceptional in difficult to machine
materials where adhesive wear is particularly high and can be run
at much higher speeds and feeds than all other coatings.