Zhuzhou Weikeduo Cemented Carbide Co., Ltd. |
Verified Suppliers
|
|
Wear Resistance Tungsten Carbide Nozzle 100% Virgin Raw Materials
Tungsten Carbide Nozzle Introduction
1. 100% virgin raw materials.
2. Various kinds of grades are availalbe based on customer's
application.
3. we have professional advanced production line and inspeciton
equipments to ensure high quality products.
4. Precision Ground and high polishing process
5. High wear resistance,high hardness and impact toughness
6. Advanced technology , precise grinding.
Tungsten Carbide Nozzle spcifications:
Sand tube due to high-speed abrasive particle erosion, its
selection is very important.Sand tube material, in general, must
have high hardness, high resistance Grinding, both be short of one
cannot.Generally for tungsten carbide composite materials
processing.Usually, cemented carbide, WC as the main
resistance,Grinding phase exists in the form of particles, CO, just
as the binder.
Use: widely used in various types machine, WHP type, FLOW type,
type JET, KMT, OMAX type, type WS.
Life: 150-300 hours refers to the general statistical time under
350 Mpa working pressure. The service life of sand mixing pipe is
determined not only by its own quality, but also by many factors,
such as working pressure, water column, abrasive (pomegranate
sand), knife head structure design and some human factors. Among
them, the influence of water column on the life of sand mixing pipe
is most easily ignored in practical application. water
Tungsten Carbide Nozzle application:
• Wet Blasting
• Suction Blast
• Mirco Abrasive
• Scrubber
• Descaling
• Slurry Jet
• Spray Drying
•Centrifuge
Parameters
NO. | model | ΦD(mm) | Φd1(mm) | L(mm) | θ° | а° |
1 | 6.35*1.02*76.2 | 6.35 | 1.02 | 76.2 | 40 | 28 |
2 | 6.35*0.76*76.2 | 6.35 | 0.76 | 76.2 | 40 | 28 |
3 | 6.35*0.91*76.2 | 6.35 | 0.91 | 76.2 | 40 | 28 |
4 | 6.35*1.02*101.6 | 6.35 | 1.02 | 101.6 | 40 | 28 |
5 | 6.35*0.76*101.6 | 6.35 | 0.76 | 101.6 | 40 | 28 |
6 | 7.14*1.02*76.2 | 7.14 | 1.02 | 76.2 | 40 | 28 |
7 | 7.14*0.76*76.2 | 7.14 | 0.76 | 76.2 | 40 | 28 |
8 | 7.14*0.91*76.2 | 7.14 | 0.91 | 76.2 | 40 | 28 |
9 | 9.45*1.02*76.2 | 9.45 | 1.02 | 76.2 | 40 | 28 |
10 | 9.45*0.76*76.2 | 9.45 | 0.76 | 76.2 | 40 | 28 |
11 | 9.43*1.02*76.2 | 9.43 | 1.02 | 76.2 | 40 | 28 |
12 | 9.43*0.76*76.2 | 9.43 | 0.76 | 76.2 | 40 | 28 |
13 | 9.45*1.02*79 | 9.45 | 1.02 | 79.0 | 40 | 28 |
14 | 9.45*0.76*79 | 9.45 | 0.76 | 79.0 | 40 | 28 |
15 | 9.45*1.02*101.6 | 9.45 | 1.02 | 101.6 | 40 | 28 |
16 | 9.45*0.76*101.6 | 9.45 | 0.76 | 101.6 | 40 | 28 |
17 | 9.45*1.02*120 | 9.45 | 1.02 | 120.0 | 40 | 28 |
18 | 9.45*0.76*120 | 9.45 | 0.76 | 120.0 | 40 | 28 |
19 | 7.14*1.02*101.6 | 7.14 | 1.02 | 101.6 | 40 | 28 |
20 | 7.14*0.76*101.6 | 7.14 | 0.76 | 101.6 | 40 | 28 |
21 | 7.14*0.89*101.6 | 7.14 | 0.89 | 101.6 | 40 | 28 |
22 | 7.14*0.91*101.6 | 7.14 | 0.91 | 101.6 | 40 | 28 |
23 | 7.14*1.02*120 | 7.14 | 1.02 | 120.0 | 40 | 28 |
24 | 7.14*0.76*120 | 7.14 | 0.76 | 120.0 | 40 | 28 |
25 | 8.0*1.02*101.6 | 8.00 | 1.02 | 101.6 | 40 | 28 |
26 | 8.0*0.76*101.6 Grooved sand pipe | 8.00 | 0.76 | 101.6 | 40 | 28 |
Details