|
[China]
Trade Verify
Address: Room 411, Building B, Smart Cube, No. 460, Jinshan Road, Hetang District, Zhuzhou City, Hunan Province
Contact name:Victor
Zhuzhou Weikeduo Cemented Carbide Co., Ltd. |
|
Verified Suppliers
|
|
|
Long Wearing Tungsten Carbide Inserts With Two Or Four Wear Edges
Long wearing tungsten carbide round cutter inserts are offered in dozens of standard sizes with two or four wear edges, this carbide inserts are the perfect choice for running woods such as Teak, Hard Maple,Ipe and MDF.
Tungsten Carbide Inserts Application:
Round cutter carbide inserts is a form of wood working that is used to create wooden objects on a lathe,carbide wood turning tools can be used to rough out any type of turning from bowls to pens,and spindles. After the roughing is accomplished the tool can be used for sheer scraping to smooth out the surface.
Tungsten Carbide Inserts Specification:
--Optional Grade for wood working
| Grade chioce for carbide reversible knives,indexable knives | ||||||||
| Type | Grade | Grain Size μm | Cobalt(WT.%) | Density g/cm³ | Hardness HRA | T.R.S N/mm² | Recommended Applicatiom | ISO code |
| Woodworking blades | YG8 | Medium | 8% | 14.8 | 90.5 | 2400 | General wood.hardwood | K20 |
| YG6 | Medium | 6% | 15.0 | 91.0 | 2300 | General wood | K20 | |
| VKD016 | Fine | 8% | 14.7 | 91.2 | 2500 | Hard wood | K20 | |
| VKD018 | Submicron | 10% | 14.5 | 91.8 | 3200 | Hard wood | K30 | |
| VKD007 | Submicron | 7% | 14.7 | 92.9 | 3000 | MDF, HDF | K30 | |
