Zhuzhou Weikeduo Cemented Carbide Co., Ltd. |
Verified Suppliers
|
|
High Quality CNC Metal Turning Tool Blade Turning Tool Carbide Milling Blade
Triangle Carbide Inserts have the following advantages:
1. It is conducive to the promotion of new technology, new
technology indexable knives and the promotion of the use of
coatings, ceramics and other new tool materials.
2. It is helpful to reduce the cost of cutting tools because of the
long service life of the tool rod, which greatly reduces the
consumption and inventory of the tool rod, simplifies the
management of the tool and reduces the cost of the tool.
Clamping characteristics and requirements of indexable turning tool
blades:
A. The change of tool tip position should be within the
allowable range of workpiece accuracy when the positioning accuracy
is high and the blade is changed or a new blade is replaced.
B. The reliable clamping of blades should ensure that the
contact surfaces of blades, tool pads and tool rods are closely
fitted and can withstand impact and vibration, but the clamping
force should not be too large and the stress distribution should be
uniform so as to avoid crushing the blades.
C. Smooth chip removal blade in front of the best
barrier-free, to ensure the smooth chip discharge, and easy to
observe.
D. Easy to use, easy to change blades and update blades. For
small size cutters, the structure should be compact. When meeting
the above requirements, the structure is simple and the manufacture
and use are convenient as far as possible.
(4) Forming turning tool is a special tool for processing the
forming surface of revolving body. Its edge shape is designed
according to the workpiece profile and can be used to process the
forming surface of internal and external revolving body on various
lathes. When parts are machined with formed turning tools, the
surface of parts can be formed at one time. It is easy to operate
and has high productivity. After processing, it can reach tolerance
grade IT8~IT10, roughness is 10~5 micron, and it can ensure high
interchangeability. However, the manufacture of forming turning
tools is complex, the cost is high, and the working length of the
blade is wide, so it is easy to cause vibration. Forming turning
tools are mainly used to process large batches of medium and small
size parts with formed surface.
Classification by use
(1) Turning tools can be divided according to their use.
(a) 90 degree turning tool (partial knife);
(b) 45 degree turning tool (elbow turning tool);
(c) Cutting knife;
(d) Boring cutters;
(e) Formed turning tools;
(f) Thread turning tools;
(g) Carbide non-grinding turning tools
(2) Basic uses of various turning tools
(a) 90 degree turning tool: used for turning the workpiece's
outer circle, step and end face.
(b) 45 degree turning tool: used for turning the workpiece's
outer circle, end face and chamfer.
(c) Cutting knife: used to cut the grooves cut out on the
workpiece or workpiece.
(d) Boring cutter: used for turning the inner hole of the
workpiece.
(e) Forming turning tools: used for turning fillets, grooves
or workpieces with special shapes at the step.
(f) Thread turning tool: used for turning threads.
No. | Grade | Grade description | Grade(Competitors) |
1 | YBC152 | CVD coated P10–P20 carbide grade for finishing to medium operation of steel and casting steel. Outstanding performance under higher cutting speed and temperature with excellent wear resistance. | GC4315(), E6020(MITSUBISHI), T9125(TUNGALOY) |
2 | YB6315 | CVD coating grade combining nano dioxygen gradient transition techniques and crystal nucleus pre-insertion techniques. | GC4315(), T9115(TUNGALOY) |
3 | YBC252 | CVD coated P20–P35 carbide grade for medium operation to roughing of steel and casting steel. Optimal performance of wear resistance and toughness for a wide application field. | GC4325(),E6020(MITSUBISHI),T9125(TUNGALOY) |
4 | YBD102 | CVD coated K05–K20 carbide substrate. Optimized for medium operation of cast iron, special nodular cast iron and hard steel at high cutting speed. | UC5115(MITSUBISHI) |
5 | YBD152 | CVD coated K10–K25 carbide substrate. Optimized for medium to roughing operation of cast iron. Good wear resistance and toughness at higher cutting speed. | UC5115(MITSUBISHI) |
6 | YBD152C | Thick Al2O3 CVD coated K05–K25 carbide substrate. Optimized for medium to roughing operation of cast iron.Higher wear resistance and toughness at higher cutting speed in combination with TC chip breaker. | UC5115(MITSUBISHI) |
7 | YB7315 | CVD coated K10–K25 carbide substrate. Optimized for medium to roughing operation of cast iron. Improved wear resistance and toughness at high cutting speed. | UC5115(MITSUBISHI), WAK20() |
8 | YBM153 | CVD coated M10–M25 carbide grade for fnishing to medium application in stainless steel. High wear resistance and capability against plasctic deformation at higher cutting speed. | |
9 | YBM253 | CVD coated M15–M35 carbide grade for medium to roughing operation in stainless steel with wide application field. High wear resistance and capability against plasctic deformation at higher cutting speed. | |
10 | YBG202 | PVD coated M10–M25/P10–P30 carbide substrate for finishing to medium application of stainless steel and steel (milling). Good wear resistance in a wide application field. | |
11 | YBG205 | PVD multilayer coated M20–M40/S15–S25/P10–P30 carbide substrate for finishing to medium application of stainless steel, super alloy and steel (milling). Good wear resistance and thermal stability in a wide application field. | VP15TF(MITSUBISHI) |
12 | YB9320 | PVD multilayer coated M10–M25/P10–P30 carbide substrate for finishing to medium application of stainless steel, super alloy and steel (grooving/milling).Optimized coating stability for higher wear resistance and thermal stability in a wide application field. | |
13 | YNT251 | Uncoated P10–P25 cermet grade for fine finishing to medium operation of steel and stainless steel. Good wear resistance and toughness. Suitable also in light interrupted cut. | |
... | ... | DON'T HESITATE TO CONTACT US TO GET MORE DETAILS! | ... |
YG3X 14.6-15.2 1320 92 is suitable for high speed finishing of small cutting sections of cast iron, non-ferrous metal and alloy quenched steel alloy steel.
YG6A 14.6-15.0 1370 91.5 is suitable for
semi-finishing of hard cast iron, non-ferrous metals and their
alloys, as well as semi-finishing and finishing of high manganese
steel, quenched steel and alloy steel.
The production and application of
YG6X 14.6-15.0 1420 91 show that the alloy has good effect in processing cold-hard alloy cast iron and heat-resistant alloy steel, and is also suitable for surface treatment of ordinary cast iron.
YG6 14.5-14.9 1380 89 is suitable for medium
cutting speed semi-finishing of cast iron, non-ferrous metal and
alloy non-metallic materials.
YG6X-1 14.6-15.0 1500 90 is suitable
for continuous cutting, semi-precision turning, small section
precision turning, rough turning thread, continuous section
semi-precision milling, hole roughing and precision milling of cast
iron, non-ferrous metal and its alloy non-metallic materials.
YG8N 14.5-14.8 2000 90 is suitable for
high speed cutting of cast iron, white cast iron, nodular cast
iron, chromium, nickel stainless steel and other alloy materials.
YG8 14.5-14.9 1600 89.5 is suitable for rough
turning, roughing, grinding, drilling and reaming of general and
deep holes in the processing of cast iron, non-ferrous metals,
their alloys and non-metallic materials.
YS2T 14.4-14.6 2200 91.5 belongs to
superfine grain alloy. It is suitable for milling low-speed rough
turning, heat-resistant alloy and titanium alloy. It is used as
cutting tool, tap and saw blade milling cutter.
YT15 11.0-11.7 1150 91 is suitable for
rough turning, semi-finishing turning and finishing turning in
continuous cutting, small cross-section finishing turning in
intermittent cutting, semi-finishing turning and finishing turning
on continuous surface, rough and precise expanding of holes in
processing of carbon steel and alloy steel.
YT5 12.5-13.2 1430 89.5 is suitable for rough
turning, rough shaving, semi-fine shaving, rough grinding and
drilling of discontinuous surfaces of carbon and alloy steels
(including steel forgings, stamping parts and casting surfaces).
YS25 12.8-13.2 2000 91 is suitable for
rough turning, milling and planing of carbon steel, cast steel,
high manganese steel, high strength steel and alloy steel.
YS30 12.45 1800 91.0 belongs to superfine
grain alloy. It is suitable for efficient milling of various steel,
especially alloy ste
TYPE | L | ΦI.C | S | R | |||
TPGN090204 | 9.6 | 5.56 | 2.38 | 0.4 | |||
TPGN090208 | 9.6 | 5.56 | 2.38 | 0.8 | |||
TPGN110204 | 11 | 6.35 | 2.38 | 0.4 | |||
TPGN110304 | 11 | 6.35 | 3.18 | 0.4 | |||
TPGN110308 | 11 | 6.35 | 3.18 | 0.4 | |||
TPGN160304 | 16.5 | 9.525 | 3.18 | 0.8 | |||
TPGN160308 | 16.5 | 9.525 | 3.18 | 0.4 | |||
TPGN160312 | 16.5 | 9.525 | 3.18 | 0.8 | |||
TPGN160316 | 16.5 | 9.525 | 3.18 | 1.2 | |||
TPGN220408 | 22 | 12.7 | 4.76 | 1.6 | |||
TPGN220404 | 22 | 12.7 | 4.76 | 0.4 | |||
TPGN220408 | 22 | 12.7 | 4.76 | 0.8 | |||
TPGN220412 | 22 | 12.7 | 4.76 | 1.2 | |||
TPGN270408 | 27.5 | 15.875 | 4.76 | 0 |