|
[China]
Trade Verify
Address: Room 411, Building B, Smart Cube, No. 460, Jinshan Road, Hetang District, Zhuzhou City, Hunan Province
Contact name:Victor
Zhuzhou Weikeduo Cemented Carbide Co., Ltd. |
|
Verified Suppliers
|
|
|
Cemented Tungsten Carbide Rings Good Wear Resistance For Rolling Mills
Description of the tungsten carbide roll
Carbide rolls are widely used in metal forming, especially in hot rolling industry mainly for intermediate and last finishing stands to ensuring superior surface finish and dimensional stability of processed metal products. Rolls are also commonly used for wire flattening, de-scaling and straightening applications.
Recommended Grade:
| Grade | Chemical Composition | Mechanical Properties | |||
| WC(%) | Co+Ni+Cr(%) | Density(g/cm³) | Hardness (>=HRA) | TRS (>=MPA) | |
| YGH30 | 85 | 15 | 14.02 | 84.9 | 2700 |
Other grades would be recommended according to your requirements.
Dimension
| Size | Diameter(mm) | Bore(mm) | Height(mm) |
| CR-125*82*15 | 125 | 82 | 15 |
| CR-140.8*90*15 | 140 | 90 | 15 |
| CR-145*95*15 | 145 | 95 | 15 |
| CR-145.8*90*15 | 145 | 90 | 15 |
| CR-150*90*15 | 150 | 90 | 15 |
| CR-150*95*15 | 150 | 95 | 15 |
| CR-180*125*18 | 180 | 125 | 18 |
Finished size(mm)
| Radial run-out of groove | Radial run-out of periphery | End face runout | Surface parallelism | Inner hole cylindricity |
| 0.013 | 0.013 | 0.01 | 0.01 | 0.01 |
Finished size with the tolerance(mm):
| OD | Tolerance | ID | Tolerance | H | Tolerance |
| <=125 | 1 | <=90 | 0.0/+0.02 | <=20 | -1 |
| >125~180 | 1 | >90~95 | 0.0/+0.02 | >20 | -1 |
| >180~250 | 1 | >95 | 0.0/+0.02 | ---- | -1 |
| >250 | 1 | ----- | 0.0/+0.02 | ----- | -1 |
