Active Member
|
[China]
Address: No.18, Yinhu Development Zone, Dongxihu District Wuhan China
Contact name:Nichole Deng
Wuhan Qiaoxin Refrigeration Equipment CO., LTD |
|
|
Copper Tube Heat Exchanger Water Cooling Type
Shell and Tube Condenser
Copper Tube Heat Exchanger Water Cooling Type Shell and Tube
Condenser is suitable for water cooled
unit, water source heat pump, air cooled pump and air cooled heat pump
unit.
The product is applying for refrigerants of R22, R134a, R407C and
R410A etc.
The referigerating medium is for tap water, underground water,
river water and sea water or brine, water
and glycol solution, sulfate solution, etc.
For heat exchange tube, copper pipe, copper nickel alloy tube,
aluminum brass tube, stainless steel tube,
etc. The shell raw material mainly are seamless steel tube,
stainless steel pipe.
1, Heat exchange tube: four main tube type.
(1) ∅ within 3/8 "thread copper coil, it is mainly used for" U
"type tube evaporator.
(2) ∅ within 1/2 "threaded straight copper tube, straight tube is
mainly used for dry-type evaporator.
(3) ∅ 1/2 "corrugated straight stainless steel tube, straight tube
is mainly used in food industry of dry
evaporator.
(4) ∅ 5/8 "inside outside screw wing efficient copper tube, it is
mainly used for air precooling industry dry
evaporator.
2, shell raw material:
There are two of the major materials:
(1) # 20 seamless steel tube, mainly used for all kinds of load -
more than 20 ℃ cold agent.
(2) 304/316 l stainless steel tube, it is mainly used for food and
low temperature (below 25 ℃, higher than
40 ℃) of the refrigerant, 316 l can also be used for cooling load
of the sulfate for industry.
3, interface:
Dry type spiral baffle plate evaporator, flooded evaporator, built-in oil separator condenser, sea water
condenser, stainless steel heat exchanger, oil cooler, oil separator, gas-liquid separator and liquid
accumulator.
The heat exchange tube uses copper pipe, nickel-copper alloy tubes, aluminum brass tube and stainless
steel tube as the material and the shell uses No.20 seamless steel tube and stainless steel tube.
CONDENSER SERIES SINGLE SYSTEM
CAPACITY: 3RT TO 15RT
| Model | Refrig. ton (RT) | Refrig. ton (104kcal/h) | Dimension (mm) | Weight (kg) | Max. water flow | |||||
| D | T1 | T | A | C | E | |||||
| QXC3S4 | 3 | 1.134 | 114 | 635 | 721 | 75 | 140 | 70 | 23 | 2.5 |
| QXC5S5 | 5 | 1.890 | 140 | 635 | 721 | 75 | 165 | 70 | 33 | 4 |
| QXC8S6 | 8 | 3.024 | 168 | 762 | 858 | 90 | 185 | 92 | 49 | 6.5 |
| QXC10S6 | 10 | 3.780 | 168 | 953 | 1049 | 90 | 185 | 92 | 58 | 7.8 |
| QXC12S6 | 12 | 4.536 | 168 | 953 | 1049 | 90 | 185 | 92 | 62 | 9.6 |
| QXC15S6 | 15 | 5.670 | 168 | 1270 | 1366 | 100 | 185 | 92 | 75 | 11.6 |
| Model | S (Vent) | P (fluoride inlet) Copper pipe diameter (inch) | L(fluoride outlet) Copper pipe diameter (inch) | W (standard port) | W (optional port) |
| FPT(inner pipe thread) | FPT(inner pipe thread) | FPT(inner pipe thread) | |||
| QXC3S4 | 1/4 | 5/8 | 5/8 | 1 | 3/4 |
| QXC5S5 | 1/4 | 5/8 | 5/8 | 1-1/2 | 1 |
| QXC8S6 | 1/4 | 7/8 | 5/8 | 1-1/2 | 1 |
| QXC10S6 | 1/4 | 7/8 | 5/8 | 1-1/2 | 1 |
| QXC12S6 | 1/4 | 1-1/8 | 7/8 | 1-1/2 | 1 |
| QXC15S6 | 1/4 | 1-1/8 | 7/8 | 1-1/2 | 1 |
CONDENSER SERIES SINGLE CIRCUIT
CAPACITY: 40RT TO 60RT
| Model | Refrig. ton (RT) | Refrig. ton (104kcal/h) | Dimension (mm) | Weight (kg) | Max. water flow | |||||
| D | T1 | T | A | C | E | |||||
| QXC40S10 | 40 | 15.12 | 273 | 1600 | 1750 | 120 | 273 | 85 | 172 | 31 |
| QXC45S10 | 45 | 17.01 | 273 | 1600 | 1750 | 120 | 273 | 85 | 180 | 35 |
| QXC50S10 | 50 | 18.90 | 273 | 2032 | 2182 | 120 | 273 | 85 | 209 | 38.5 |
| QXC55S10 | 55 | 20.79 | 273 | 2032 | 2182 | 120 | 273 | 85 | 217 | 42.5 |
| QXC60S10 | 60 | 22.68 | 273 | 2032 | 2182 | 120 | 273 | 85 | 224 | 46 |
| Model | S (Vent) | P (fluoride inlet) Copper pipe diameter (inch) | L(fluoride outlet) Copper pipe diameter (inch) | W (standard port) | W (optional port) |
| FPT(inner pipe thread) | FPT(inner pipe thread) | FPT(inner pipe thread) | |||
| QXC40S10 | 3/8 | 1-5/8 | 1-1/8 | 3 | 2-1/2 |
| QXC45S10 | 3/8 | 1-5/8 | 1-1/8 | 3 | 2-1/2 |
| QXC50S10 | 3/8 | 1-5/8 | 1-1/8 | 3 | 2-1/2 |
| QXC55S10 | 3/8 | 1-5/8 | 1-3/8 | 3 | 2-1/2 |
| QXC60S10 | 3/8 | 1-5/8 | 1-3/8 | 3 | 2-1/2 |
CONDENSER SERIES DOUBLE CIRCUIT
CAPACITY: 10RT TO 40RT
| Model | Refrig. ton (RT) | Refrig. ton (104kcal/h) | Dimension (mm) | Weight (kg) | Max. water flow | ||||||
| D | T1 | T | A | C | C2 | E | |||||
| QXC10D6 | 10 | 3.78 | 168 | 483 | 1065 | 75 | 185 | 233 | 92 | 78 | 7.8 |
| QXC15D6 | 15 | 5.67 | 168 | 635 | 1369 | 75 | 185 | 233 | 92 | 85 | 11.6 |
| QXC20D6 | 20 | 7.56 | 168 | 819 | 1737 | 90 | 185 | 233 | 92 | 96 | 15.8 |
| QXC25D6 | 25 | 9.45 | 219 | 819 | 1755 | 90 | 238 | 285 | 113 | 132 | 19.5 |
| QXC30D6 | 30 | 11.34 | 219 | 819 | 1755 | 90 | 238 | 285 | 113 | 137 | 23 |
| QXC35D6 | 35 | 13.23 | 219 | 819 | 1755 | 90 | 238 | 285 | 113 | 145 | 27.3 |
| QXC40D6 | 40 | 15.12 | 219 | 953 | 2024 | 90 | 238 | 285 | 113 | 162 | 31 |
| Model | S (Vent) | P (fluoride inlet) Copper pipe diameter (inch) | L(fluoride outlet) Copper pipe diameter (inch) | W (standard port) |
| FPT(inner pipe thread) | FPT(inner pipe thread) | |||
| QXC10D6 | 1/4 | 5/8 | 5/8 | 1-1/2 |
| QXC15D6 | 1/4 | 7/8 | 5/8 | 1-1/2 |
| QXC20D6 | 1/4 | 7/8 | 5/8 | 1-1/2 |
| QXC25D6 | 1/4 | 1-1/8 | 7/8 | 2 |
| QXC30D6 | 1/4 | 1-1/8 | 7/8 | 2-1/2 |
| QXC35D6 | 1/4 | 1-3/8 | 7/8 | 2-1/2 |
| QXC40D6 | 1/4 | 1-3/8 | 7/8 | 2-1/2 |
CONDENSER SERIES DOUBLE CIRCUIT
CAPACITY: 50RT TO 200RT
| Model | Refrig. ton (RT) | Refrig. ton (104kcal/h) | Dimension (mm) | Weight (kg) | Max. water flow | |||||||
| D | T1 | T | A | C | E | H1 | H2 | |||||
| QXC50D10A | 50 | 18.9 | 273 | 953 | 2364 | 90 | 360 | 150 | 350 | 240 | 265 | 38.5 |
| QXC60D10A | 60 | 22.68 | 273 | 953 | 2364 | 90 | 360 | 150 | 350 | 240 | 279 | 46 |
| QXC70D12A | 70 | 26.46 | 325 | 953 | 2377 | 90 | 406 | 180 | 350 | 240 | 359 | 53.5 |
| QXC80D12A | 80 | 30.24 | 325 | 953 | 2377 | 90 | 406 | 180 | 350 | 240 | 375 | 61 |
| QXC100D12A | 100 | 37.80 | 325 | 953 | 2377 | 90 | 406 | 180 | 350 | 240 | 409 | 76 |
| QXC120D12A | 120 | 45.36 | 325 | 1270 | 3011 | 120 | 406 | 180 | 350 | 240 | 481 | 91 |
| QXC140D14A | 140 | 52.92 | 355 | 1270 | 3018 | 120 | 440 | 200 | 350 | 240 | 553 | 106 |
| QXC160D16A | 160 | 60.48 | 426 | 1600 | 3656 | 120 | 510 | 260 | 310 | 310 | 723 | 120.6 |
| QXC200D16A | 200 | 75.60 | 426 | 1600 | 3656 | 120 | 510 | 260 | 310 | 310 | 777 | 150.8 |
| Model | S (Vent) | P (fluoride inlet) Copper pipe diameter (inch) | L(fluoride outlet) Copper pipe diameter (inch) | W (standard port) |
| FPT(inner pipe thread) | Male flange | |||
| QXC50D10A | 3/8 | 1-3/8 | 7/8 | DN65 |
| QXC60D10A | 3/8 | 1-5/8 | 1-1/8 | DN65 |
| QXC70D12A | 3/8 | 1-5/8 | 1-1/8 | DN80 |
| QXC80D12A | 3/8 | 1-5/8 | 1-1/8 | DN80 |
| QXC100D12A | 3/8 | 2-1/8 | 1-3/8 | DN100 |
| QXC120D12A | 3/8 | 2-1/8 | 1-3/8 | DN100 |
| QXC140D14A | 3/8 | 2-1/8 | 1-3/8 | DN100 |
| QXC160D16A | 3/8 | 2-5/8 | 1-3/8 | DN125 |
| QXC200D16A | 3/8 | 2-5/8 | 1-5/8 | DN125 |
OIL COOLER CAPACITY
3RT TO 40RT
| Model | Refrig. ton (RT) | Refrig. ton (104kcal/h) | Dimension (mm) | Weight (kg) | |||||
| D | T1 | T | A | C | E | ||||
| QXCF3S4 | 3 | 1.134 | 114 | 635 | 721 | 75 | 140 | 70 | 23 |
| QXCF5S5 | 5 | 1.189 | 140 | 635 | 721 | 75 | 165 | 70 | 33 |
| QXCF8S6 | 8 | 3.024 | 168 | 762 | 858 | 90 | 185 | 92 | 49 |
| QXCF10S6 | 10 | 3.780 | 168 | 953 | 1049 | 90 | 185 | 92 | 58 |
| QXCF12S6 | 12 | 4.536 | 168 | 953 | 1049 | 90 | 185 | 92 | 62 |
| QXCF15S6 | 15 | 5.670 | 168 | 1270 | 1366 | 100 | 185 | 92 | 75 |
| Model | S (Oil vent) | P1 (inlet/outlet oil vent) Copper pipe external diameter (inch) | W (inlet/outlet water vent) |
| FPT(inner pipe thread) | FPT(inner pipe thread) | ||
| QXCF3S4 | 1/2 | 5/8 | 1 |
| QXCF5S5 | 1/2 | 5/8 | 1-1/2 |
| QXCF8S6 | 1/2 | 7/8 | 1-1/2 |
| QXCF10S6 | 1/2 | 7/8 | 1-1/2 |
| QXCF12S6 | 1/2 | 1-1/8 | 1-1/2 |
| QXCF15S6 | 1/2 | 1-1/8 | 1-1/2 |
COOPERATED CLENTS
