Active Member
|
[China]
Address: No.1, 2nd Road, Jiangbei Industrial Zone, Zhuangtou, Chencun, Shunde District, Foshan City, Guangdong Province, China.
Contact name:Stephanie Tan
Foshan BST Machinery Co., Ltd. |
|
|
Brief introduction
Laser tube cutting is specifically designed for businesses that care about high quality profile & tube cutting. Optional full automatic Loading & Unloading requires less effort and time saving for the operator. And can cut column crossed lines at the end of branch pipe, and meet centrifugal and non-centrifugal.
* User friendly FSCUT 5000 Twin CAT CNC control.
|
* Maximum moving speed: 100m/min.
|
* Acceleration speed: 0.6G.
|
* CNC and CAM can calculate complex profiled sections.
|
* Energy efficiency: greatly reduced power consumption.
|
* IPG/MAX/Raycus resonator. Power output from 1000W to 6000W.
|
* Advanced Ospri laser cutting head.
|
* Effective high to low pressure gas exchange system.
|
* Automatic time and unit cost calculation function.
|
* Smoke extraction (included in series models).
|
* High flexibility, can process round, square, rectangle “C” / “H” / “I” channel and angle.
|
Technical parameters
| Processing Format & Working Range | |
| Processing Area( L × W ) | 6000mm×360mm |
| X-axis Stroke | 370mm |
| Y-axis Stroke | 6000mm |
| Z-axis Stroke | 300mm |
| Accuracy | |
| X/Y Axis Positioning Accuracy | ±0.03mm/m |
| X/Y Axis Repositioning Accuracy | ±0.03mm/m |
| Speed | |
| Max. Moving Speed | 100m/min |
| Max. Chuck Speed | 80r/min |
| Weight & Size | |
| Max. Single Tube Loading Weight | 400KG |
| Tail Length | 350mm |
| Dimension(L×W×H) | 9980*2050*2640mm |
| Weight(kg) | 5600kg |
Professional Tube Cutting System
High Compatibility for Tubes And Profiles Cutting Based on the bus real-time system and the integrated follow-up control, fast cutting and stable following of the tube corner can be achieved, ensuing reliable cutting quality. Optional tube nesting software TubesT which supports angle steel/ channel beam/ I-beam toolpath editing makes it easier to draw 3D graphics and co-edge cutting, saving time and materials. |
Pneumatic Front Chuck
Protection Covering Aluminum cover helps to improve the corrosion resistance and sealing performance.
|
Strong Load-Bearing Capacity Full stroke external roller increases chuck clamping trust and bearing capacity.
|
Safety Protection Equipped with the pressure holding function, the holding time in up to 8 hours, which can avoid safety accidents caused by accidental power for gas failure.
|
Solid Rear Chuck
High Rigidity Strong clamping force and anti-skid claw makes the tubes not easy to fall off.
|
Easy Debugging Easily installed by keyway groove positioning, convenient to debug the claw.
|
Special-shaped Tubes Except normal round pipe, square tube and rectangular, other special shapes like triangular, oval, H-beam, U-channel, open shaped structural beams can be firmly holder by the chuck without deformation.
|
Less Waste Tailing The rear claw can be extended into the front chuck to realize ultra-short tailing cutting.
|
Servo Roller Support
Two Shapes Sides Compatible For Tubes And Profiles T-shaped for round and square tubes and pipes, another V-shaped for triangular, oval, rectangular and other special shapes.
|
Maximum Protection From Drops or Damage The roller support will move vertically to support the tube/pipe during processing.
|
High Precision Cutting Following up and down to effectively avoid shaking of the pipe/tube, guarantee high precision laser cutting.
|
Quadruple Rollers Clamping System
Strong Stability Four-roller design, it works with the servo roller support, double ensure higher stability.
|
Good Dynamic Performance Fast reaction speed, wear-resistant structure to prevent the pipe/tube from scratching in the processing of turning over.
|
Servo Following Mounting Structure
Stable Structure and Strong Bearing Capacity The triangle structure of 45 degree inclined linear guide rail, original guide rail and linear guide rail makes the structure more stable, the bearing capacity stronger and the precision higher |
High Precision Guide Rail
Renowned Brand The rack and pinions, and guide rail are introduced from famous Taiwan brands, which have excellent durability, accuracy, strength and wear resistance. |
High Accuracy Gear Transmission Structure
Easy Maintenance Gear transmission characterizes high transmission efficiency, high peripheral speed, accurate transmission ratio, long service life.
|
High Efficiency Transmission Constant instantaneous transmission ratio and high working stability, higher meshing accuracy.
|
Applications
Laser tube cutting machine technologies keep up with market dynamics, it is widely applied in various industries, such as furniture shelves, outdoor fitness equipment, bike frame, education equipment, bed frame, construction, food service, agriculture, architecture industry and etc.
