Active Member
|
[China]
Address: Gaoya Village Industrial Park, Bayu Town, high tech Development Zone, Baoji City, Shaanxi Province, China
Contact name:Hang Ning
Baoji Feiteng Metal Materials Co., Ltd. |
|
|
Titanium Plate Titanium Gr2 12*1500*6000 ASTM B265 Titanium Sheet
| Item name | Titanium plate |
| Packaging | Custom |
| Standard | ASTM B265 |
| Grade | Gr2 |
| Port of place | Xi'an port, Beijing port, Shanghai port, Guangzhou port, Shenzhen port |
Titanium has a metallic luster and ductility. Titanium is characterized by its low density, high mechanical strength and ease of processing. The plasticity of titanium depends largely on its purity. The purer the titanium, the more plastic it is. Good corrosion resistance, not affected by the atmosphere and seawater. Dense titanium is fairly stable in nature, but powder titanium can cause spontaneous combustion in air. The presence of impurities in titanium significantly affects the physical, chemical, mechanical properties and corrosion resistance of titanium. In particular, some interstitial impurities can distort the crystal lattice of titanium and affect various properties of titanium. In seawater, titanium has incomparable corrosion resistance, especially the high speed erosion corrosion of seawater. At present, many countries have developed a variety of advanced titanium submersible, submarine, submarine laboratory equipment to carry out Marine research. In addition, titanium equipment and devices are widely used in coastal power stations, offshore oil production equipment, seawater desalination, Marine chemical production and mariculture.
Titanium plate manufacturing process
Hot forging: Forging of a metal above the recrystallization temperature.
Hot rolling: a process of rolling at temperatures higher than recrystallization.
Cold rolling: rolling process in which the plastic deformation temperature is lower than the recovery temperature.
Annealing: Heat treatment of a metal by slowly heating it to a certain temperature, holding it for a sufficient time, and then cooling it at a suitable rate (usually slow cooling, sometimes controlled cooling).
Pickling: to remove the oxide films on the metal surface by immersing the parts in an aqueous solution such as sulfuric acid. It is pretreatment or intermediate treatment of electroplating, enamel, rolling, and other processes.
Major benefit of titanium parts
1, Low density, good ductility
2, It can be customized according to the drawings required by customers
3, corrosion resistance
4, Heat resistance
5, Low temperature resistance
