Baoji Feiteng Metal Materials Co., Ltd. |
|
Shaft Sleeve Gr2 CustomTtitanium Parts Titanium
Origin | Baoji, Shaanxi, China |
Customized | Customized |
Certification | GB/T19001-2016 idt ISO9001:2015 GJB9001C-2017 |
Port of delivery | Xi'an port, Beijing port, Shanghai port, Guangzhou port, Shenzhen port |
Grade | Gr2 |
Shaft sleeve is a cylindrical mechanical part on a rotating shaft, and is a component of a sliding bearing. In general, the bushing and the bearing block use interference fit, and the shaft use clearance fit.
The bushing refers to the sleeve on the propeller shaft or stern shaft. And bearing is in the process of mechanical transmission to fix and reduce the load friction coefficient of components.
The bushing and bearing have in common that they both bear the load of the shaft.
The difference between the two is that the shaft sleeve is a whole structure, rotation is the relative motion between the shaft and the shaft sleeve; The bearing is a split type, and the inner and outer rings of the bearing move relative to each other when rotating. But in essence, the sleeve is actually a kind of sliding bearing.
The bush is equivalent to the outer ring of the sliding bearing, the bush is integral, and the relative shaft is moving, and the bush is pieced, the relative shaft is rotating.
The bushing refers to the sleeve on the propeller shaft or stern shaft. And bearing is in the process of mechanical transmission to fix and reduce the load friction coefficient of components.
Benefits:
1. Low density and high strength
2. Customized according to the drawings required by customers
3. Strong corrosion resistance
4. Strong heat resistance
5. Low temperature resistance
6. Heat resistance