Baoji Feiteng Metal Materials Co., Ltd. |
|
Titanium Rings Gr2 ASTM B348 Titanium and titanium alloys
Item Name | Titanium Rings |
Grade | Gr2 |
Material | Titanium |
Port of delivery | Xi'an port, Beijing port, Shanghai port, Guangzhou port, Shenzhen port |
Titanium is a widely used metal, due to its light weight, higher strength than aluminum alloy, can maintain a higher strength than aluminum at high temperature and is highly valued by the aviation industry. Titanium has a wide range of uses in the military industry. Nuclear-powered submarines, hydrofoil boats, anti-tank missiles, missile launchers, bulletproof vests, etc. In the aviation industry, civilian aircraft, strategic rocket engines, spacecraft satellite antennas and other large amounts of titanium. In seawater, titanium has incomparable corrosion resistance, especially the high speed erosion corrosion of seawater.Only hydrofluoric acid, concentrated hydrochloric acid, concentrated sulfuric acid can act on it. The presence of impurities in titanium greatly affects its mechanical properties, especially the interstitial impurities (oxygen, nitrogen, carbon) can greatly improve the strength of titanium and significantly reduce its plasticity. The good mechanical properties of titanium as a structural material are achieved by strictly controlling the appropriate impurity content and adding alloying elements.
As a structural material, titanium ring has good mechanical properties. It is achieved by strictly controlling the appropriate impurity content and adding alloy elements. Titanium ring has high specific strength, good mechanical properties and good corrosion resistance. Therefore, it has become an ideal material for aircraft and engines. With the development of titanium processing technology, titanium alloy has been widely used in the manufacture of structural frame components such as compressor section, hood and exhaust device of aircraft engine in recent years.
Main advantages
1. Low density, It can not only reduce the weight of the whole
vehicle. At the same time, for high-speed moving parts, the motion
inertia is also reduced;
2. High specific strength can be used as load-bearing parts;
3. Small elastic modulus it has high fatigue strength and good
elastic potential energy, and can be used as a spring;
4. Good heat resistance suitable for high temperature parts;