Home Companies TRW Medical Instrument Co.,Ltd

Ultrasonic Surgical Laparoscopic Instruments Scalpel System Cissor Type

Contact Us

[China]

Trade Verify

Address: Room 406, No. 2, Qilin Building C, No. 53, Middle Section of Huangshan Avenue, Yubei District, Chongqing.

Contact name:Huang

TRW Medical Instrument Co.,Ltd

Verified Suppliers

Trust
Seal
Verified
Supplier
Credit
Check
Capability
Assessment

Ultrasonic Surgical Laparoscopic Instruments Scalpel System Cissor Type

Country/Region	china
City & Province	chongqing chongqing

Product Details

Improved Laparoscopic Surgical Ultrasonic Scalpel System Cissor Type Scalpel

Products Description

Ultrasonic Scalpel System

The host generator is a device (or generator) used to generate and provide electrical energy and output control to the ultrasonic driver handle. Power output is provided by activating the foot switch or manual switch adapter. The host generator generates electrical signals, which are transmitted through cables to the drive handle, which converts electrical signals into ultrasonic mechanical motion.

Product name Model Specification (only for cutter)
Cutter head 1	QUHS14S,QUHS23S,QUHS36S.	14.23.36
Cutter head 2	QUHS14S,QUHS23S,QUHS36S	45
Generator	K500.
Handle	QUHP35
Foot switch	QFS-029(optional)
Product-combination kit
Ultrasonic knife+generator
Ultrasonic knife +handle
Ultrasonic knife +cutter head
Ultrasonic knife+cutter head

I.Composition of ultrasonic cutting hemostasis knife system

The system is mainly composed of five parts:generator (K500), handle (QUHP35), cutter head (QHS14S, QHS23S and QHS36S), foot switch (QFS - 02 optional) and trolley (C100 optional).

It is the control section of ultrasonic scalpel system and its output power can be controlled by handle and foot switch.

The output power can be divided into 5 levels, of which level 1 is the minimum and level 5 is the maximum.

Ultrasonic scalpel in level 5 will show relatively strong separation capacity.

ultrasonic scalpel in level 1 will show relatively strong hemostasis capacity.

II．Profile

Ultrasonic Scalpel System

The input voltage:Ac 90V to 240V
Input frequency:50 / 60Hz
Working current:3A
Driving frequency:55.5KHz
The power consumption of the largest:300VA
Solid interface:Ricks foot FSW01, Johnson GEN300 foot FSW01
Handle to the interface:Rix transducer HPT55.5,Johnson transducer HP054,HPBLUE.
Adaptive bit:Rikers HPS36P series, all j&J head, such as ACE36E,HAR36, etc

Hand Piece Scalpel

HPS36PSeries tool head with manual button, connected with the main machine, transducer, rotary knob and torque wrench integrated.
There are 3 types of cutter head according to the length of cutter: HPS36P,HPS23P,HPS14P
HPS36P, Suitable for laparoscopic surgery
HPS23P, Suitable for open surgery
HPS14P, Suitable for superficial surgery
Compatible host:RXCD-300
GEN04(Johnson & Johnson)
GEN11(Johnson & Johnson)
Disinfection method: support 134℃ high temperature.

it can be used to control the open and close of forceps holder and the clamp & cutting of tissue. “Max” key on the front end of
handle AH-636 can be used to control level 5 of high power and the “MIN” key on the both sides of handle can be used to control
the level 1 to 4 of lower power.

Hand Piece Transducer

Apply to the host:RXCD-300
The output frequency:55.5KHz
Output interface: HPS36P and Johnson &Johnson, for example, ACE36P

TRW-UK Series tool head with manual button, connected with the main machine, transducer, rotary knob and torque wrench integrated.
There are 4 types of cutter head according to the length of cutter: TRW-UK-14,TRW-UK-23,TRW-UK-36,TRW-UK-45.

Compatible host:
RXCD-300

GEN04(Johnson & Johnson)

GEN11(Johnson & Johnson)

Disinfection method: support 134℃ high temperature.

4.Foot switch

Used to start or stop the output of ultrasound energy as soon as the pedal switch is pressed, the pedal will activate and transmit
information to the main generator. left pedal on foot switch is the switch of level 5 high power right one on foot switch is the
switch of level 1-4 power lower power with protection level of IPX8.