|
[China]
Trade Verify
Address: NO.5 ZONE 5 LANXIANG ROAD, TIANQIAO DISTRICT JINAN CHINA
Contact name:Samantha
Shandong Heavy Industry Machinery Co.,Ltd. |
|
Verified Suppliers
|
|
|
1. More than 95% of Hanma engine parts come from international brands such as Bosch, Fritzwinter, Jacobs, and Federal-Mogul. Not only is the quality reliable, but the whole machine is lighter in weight and lower in fuel consumption.
2. Hanma engine comes with an intelligent fuel-saving management system, which has seven functions, including electronic coach, intelligent foot-controlled cruise, one-button super fuel-saving, intelligent speed control, acceleration intelligent control, automatic load judgment, and intelligent idle speed control. Intelligent assisted driving not only allows the engine to always run in the most economical area, but also allows the driver to practice excellent fuel-saving driving habits without knowing it, so that users can truly save and earn.
3. Hanma engine is equipped with in-cylinder braking technology as standard. When the driver turns on the brake switch in the cylinder, the engine does not inject fuel. If the driver is driving on a long slope, it can not only avoid the safety hazard of sliding in neutral, but also has a very obvious fuel saving effect. And the in-cylinder braking technology does not require the driver to step on the brakes frequently, which reduces tire wear, improves the service life of the engine, and further reduces operating costs.
Machine data | |
Engine model: | Diesel Engine |
Cylinders/Valves | 6/24 |
Displacement | 12.82L |
Bore ×Stroke | 130×161mm |
Compression | 17:1 |
Aspiration | Turbocharged and after cooled |
Fuel system | Common rail |
Size of engine | 1432x959x1204mm |
Mass of engine | 1080kg |
Intake System | |
Charge temperature @rated output | 50℃ |
Intake depression | 3.6KPa |
Intercooled pressure loss @rated output | 11-13KPa |
IInlet flow @rated output | 1925Kg/h |
Operating maximum intake resistance (clean element) | 3.5KPa |
Running maximum intake resistance (dirty element) | 6.5KPa |
Exhaust System | |
Exhaust back pressure loss @rated output | 12KPa |
Exhaust flow @rated output | 2013Kg/h |
Max exhaust temperature before turbocharge | 700℃
|
Max exhaust temperature after turbocharge | 566℃
|
Cooling System | |
Maximum coolant temperature | 104℃ |
Thermostat(Modulating) range | 85-95℃ |
Heat loss from the radiator | 164KW |
Radiator flow rate | 480L/min |
Intercooler dissipates heat | 78KW |
Allowable intake air temperature of intercooler | 194℃ |
Maximum air intake of intercooler | 2000Kg/h |
Lubrication System | |
Maximum oil temperature | 120℃ |
Oil pressure @ idle speed | 130KPa |
Oil pressure @ rated point | 500KPa |
Oil pan allows dip Angle | 30° |
Oil capacity | 33L～41L |
Fuel System | |
Injector injection pressure | 1600bar |
Maximum supply fuel pressure | 65kPa |
Maximum return fuel pressure | 120kPa |
Fuel temperature | 38±5℃ |
Electrical System | |
Generator power | 1.96kW/28V(70A) |
Cranking motor power | 7.5kW/24V |
Cold Start Capability | |
Minimum ambient temperature for unaided cold start | -15℃
|
Minimum ambient temperature with cold start | -40℃ |
Descriptions:
1. All ratings are based on operating conditions under GB/T 2820.1-2009,ISO 2528-1:2018. Performance tolerance of ±4%.
2.Test conditions : 100kPa, 25°C air inlet temperature, relative humidity of 30%, with fuel density 0.84 kg/L. Derating may be required for conditions outside these; please contact the factory for details.
3.Power output curves are based on the engine operating with fuel system, water pump and lubricating oil pump; not included are battery charging alternator, fan and optional equipment.
4.Operation of the engine conforms to GB20891-2014 standard. | |
1. OEM Manufacturing welcome: Product, Package.
2. We will reply you for your inquiry in 24 hours.
3. After sending, we will track the products for you once every two
days, until you get the products. When you got the
goods, test them, and give me a feedback. If you have any questions
about the problem, contact with us, we will offer
the solve way for you.
1. Either original or OEM parts, we have lots of directly suppliers to choose. You could get HOWO/SHACMAN/HONGYAN/FAW spare parts bellow market price.
2. “One-shop purchasing service”: Quotation--Preparation--Delivery.
With 10+year experience, we proficient in parts business management
process.
3. After getting your order, we will take pictures of every parts
for you. Even if you have 500 items.
4. Has Sinotruk parts system, we can get the exact information
according the chassis no and assembly nameplate , accurate rate
reaches 95%.
5. Our boss is very familiar with the working principle and
maintenance of trucks.
Q1. What is your terms of packing?
A: Generally, we pack our goods in neutral white boxes and brown
cartons. If you have legally registered patent,
we can pack the goods in your branded boxes after getting your
authorization letters.
Q2. What is your terms of payment?
A: T/T 30% as deposit, and 70% before delivery. We will show you
the photos of the products and packages
before you pay the balance.
Q3. What is your terms of delivery?
A: EXW, FOB, CFR, CIF.
Q4. How about your delivery time?
A: Generally, it will take 30 to 60 days after receiving your
advance payment. The specific delivery time depends
on the items and the quantity of your order.
