Chengli Special Automobile Co., Ltd. |
|
Double axle lpg road tanker trailer 40.5cbm Propane tanker trailer 17ton lpg Road tanker, 2 BPW/FUWA axles cooking gas trailer for sale,
Specifications of CLW Brand lpg gas pressure vessels manufactured by Chengli Special Automobile Co., Ltd. as below.
1. LPG Semi trailer LPG trailer LPG tank trailer LPG tanker lpg Road tanker
2. LPG storage tank lpg Road tanker
3. LPG Three Axle Semi Trailer lpg Road tanker
4.40 CBM, 45CBM. 50CBM,54cbm 56cbm 60CBM propane Semi Trailer lpg Road tanker
5. Certification: ISO9001 CCC lpg Road tanker
If you're interested in our lpg gas tanker trailer, please send email to truck0011@163.com or talk to Anita by Whatsapp/Wechat/Mob.: +86 13329899995.
lpg Road tanker ---
1)Designing pressure: 1.61MPa Designing temperature: -20C-50C
2)The various types LPG tanker is researched and manufactured by
stress analysis design and has obvious advantage of large capacity.
Light weight and high efficiency.
3)We inspect the quality of product strictly, ensure that A and B
type of welding seam pass the examination of level two radiographic
test, C and D type of welding seam pass the examination of level
one radiographic test.
4)There are domestic or imported safety accessories with high
quality, its matching is complete.
5)The anticorrosion coating of LPG tanker adopt the following
process, sandblast, spray painting, purging and so on.
Cheng Li produced a liquefied gas storage tanks in series, can be
used to store the different nature of the liquefied petroleum gas
(propane), propylene, ammonia, dimethyl ether, methanol, butadiene,
butane, ethylene oxide, methylamine, etc. In low pressure liquefied
gases at room temperature; Volume from 10 cubic meters --- 100
cubic optional.
Chengli pressure components of the productIion materials, size and
weld quality, operation quality, installation quality, safety
valves and shut off valves devices and accessories within the
strict qualification, inspection, test. The tank materials on
physical and chemical tests such as: Mechanical properties and
chemical composition.
The tank welded joints, welding line, tank head, the pressure of
the geometric location of each component through rigorous X-ray
non-destructive testing and magnetic particle testing inspection.
Seal on the product, pressure, and those who can affect the
operation of product safety testing various technical indicators.
A, B Class 100% ray weld inspection, II level qualified
C, D Class welds 100% magnetic particle inspection, I level
qualified
More pictures of hot sale 17tons lpg gas trailer as below.
More information, please feel free to contact with Ms. Anita Deng.
Website: www.truckdf.com
QQ: 504873236
40.5 CBM LPG Trailer Parameter | |
Tanker Essential Information | |
Volume of Tank (cbm) | 40.5 |
Overall Dimensions(L*W*H)(mm) | 11324*2500*3730 |
Tank Dimensions(Inner Diameter*thickness*Length) | 2200*12*11044 |
Estimated Tare Weight (kg) | 13415 |
Payload(kg) | 17010 |
Total Weight(kg) | 30425 |
Wheelbase(mm) | 6720+1320 |
Shell of Tanker | |
Products | Liquefied Petroleum Gas (propane) |
Fluid Property | Flammable |
Design Temperature(℃) | 50℃ |
Design Pressure(MPa) | 1.61 |
Corrosion Allowance(mm) | 1.00 |
Weld Joint Factor | 1 |
Major Materials of Bearing Pressure | Tanker body:Q345,12mm, |
End plate:Q345R,12mm | |
Main beam:16Mn | |
Detection | |
Heat Treatment | Overall treatment in a furnace,600℃ to 640 ℃ |
Flaw Detection | 100% Flaw detection |
Test Pressure(MPa) | 1.61 |
Hydraulic Test(MPa) | 2.1 |
Magnaflux Inspection | Aim at welding place that flaw detection can not cover |
Manhole (As Customer’s Requirement) | |
Quantity | 1;on top |
Safety Valve(As Customer’s Requirement) | |
Quantity | 1 |
Location | On the top of tanker |
Size | DN100 or As Customer’s Requirement |
Level Gauge 3*13T Fuwa | |
Type | Float-operated |
Location | At the rear of the end plate |
Running System | |
Axles | 3*13T Fuwa or BPW |
Tire | 12R22.5 Tubeless tire ,13 with one spare tire |
Landing leg | JOST |
King Pin | #50 or #90 |
Control System | |
Emergency Cut-off Valves | 2 |
Ball Valve | 2 |
Liquid Gauge | 1 |
Pressure Indicating Thermometer | 1 |
Pressure Gage | 1 |
Accessories | |
Small Tool Box | 2 |
Wheel Carrier | 2 |
Fire Extinguisher | 2 |
Fender | 6 |
Paint | As Customer’s Requirement |
Standard: Pressure vessels, Supervision Regulation on Safety Technology for Stationary Pressure Vessels |