Shanghai Triowin Intelligent Machinery Co.,Ltd |
|
Bio Fermentation Tank Lab Pilot Machine food production Processing Machine
Description of Bio Fermentation Tank Lab Pilot Machine
TW-XJD10 fermentation tank structure is made by Stainless steel, integral design, multi-function, no dead space in tank. Specially applicable for laboratory,; can be used alone or as the seeding tank to be used with other fermentation tank; can equip guide shell expanding to airlift fermentation.
* Capacity:5L/7L/10L/15L…
* Coefficient of charge:0.65~0.8, 0.7 best
* Surface Roughness: Ra0.4 um polished inside (mechanical polishing
or electrolytic polishing).Ra0.6~0.8 um polished outside (matte
process),or grit-blasting
* Pressure:0.01Mpa ~0.05 Mpa.pressure gauge with pressure sensor,
hand regulation (standard configuration), automatic adjusted by
proportional control Valve or pneumatic valve (option)
* Material: SS316L contact with material,other part is SS304
* Stirring type:top Mechanical stirring (or below magnetic coupling
mixing),adopt single end and double mechanical seal technology. Two
sets six blades blender,three baffle blades, with mechanical
defoaming pulp
* Temperature controller:PID digital control,water forced
circulation by circulation pump, auto controlled by magnetic valve,
PT100 temperature sensor.
* Sterilization type:sterilization on site, or sterilization by
high pressure autoclave
* Temperature range:5~65±0.2℃,resolution 0.1℃
* Sterilization temperature:100 ~130℃
* Stirring speed:50~1000rpm±5%* resolution 1rmp,adjusted by
convertor. the speed is confirmed according to the tank size and
material property.
* Fetch valve and tank bottom valve can be sterilized any time.
* Equipped with standard PH, DO electrode, bubble level,
temperature sensor, feed interface,,large side wide view goggle,
security light.