Luminous Aluminium Stair Nosing Edge Trim 8mm Height Mill Finished

Luminous Aluminium Stair Nosing Edge Trim Non Slip Metal Staircase Protector

 

Application
 

Each year slips, trips and falls result in thousands of preventable injuries. Stair nosings are problem solvers and problem preventers. With stair nosings, the problem of worn stairs can be prevented. Nosings can also help prevent the problem of slips and falls because of their anti-slip features. Commercial buildings, such as schools, universities, stadiums, and office complexes get a tremendous amount of pedestrian traffic each day. Building owners need to take every possible precaution to ensure the safety of these users and help protect themselves against litigation should an accident occur. The simple act of adding quality stair nosings can help prevent slips and falls, add a sense of security, and help prolong the wear of both the stair tread and the floorcovering product used on the stairs.


Feature

Excellent quality Anodised Aluminium stair nosing with anti-slip PVC insert.

Perfect for Wooden, Laminate, Carpet, Vinyl or Tiled stairs providing you with a perfect finish,

as well as preventing any damage to your stairs and disguising any imperfections that aren't so easy on the eye.

Stair nosings are an outstanding way of finishing the edge of your stairs.

Use
 

Installation

1. Select the profile according to the tile thickness and format and the subassembly thickness.

2. Using a notched trowel, apply thin-set mortar over the area where the trapezoid perforated anchoring leg will be placed.Apply several beads of bonding compound or similar to the back side of the vertical wall section of the profile.

3. Press the perforated anchoring leg of profile into the thin-set mortar and align.

4. Trowel additional thin-set mortar over the perforated anchoring leg to ensure full coverage and support of the tile edges.

5. Solidly embed the tiles so that the tiled surface is flush with the top of the profile; the profile should not be higher than the tiled surface, but rather up to approximately 1/32" (1 mm) lower.

6. Set the tile to the integrated joint spacer, which ensures a uniform joint of 1/16" – 1/8" (1.5 – 3 mm).

7. Fill the joint completely with grout or setting material.

8. Work with materials and tools that will not scratch or damage sensitive surfaces. Setting materials must be removed immediately, especially from aluminum.

Specification