|
[China]
Trade Verify
Address: No.126,Yanshan West Road,Chengxiang Town,Taicang City,Jiangsu Province,China
Contact name:Jack Liao
Suzhou Tronsing Technology Co., Ltd |
|
Verified Suppliers
|
|
|
Three Wire Guides Transformer Coil Winding Machine Automatic
Description of transformer coil winding machine ZPX150-3
Automatic transformer coil winding machine ZPX150-3 is a special winding equipment for winding transformer coils and other similar products. With three wire guides, the transformer coil winding machine can be used to winding three coils at once, which significantly improve production effectiveness. The transformer coil winding machine can wind not only three coils with maximum length 150mm per coil, but also one coil with maximum length about 500mm.
Quick details of transformer coil winding machine ZPX150-3
Technical parameters of transformer coil winding machine ZPX150-3
Typical standard specifications of ZPX150-3 are shown below, however these can be easily modified as requested.
| Center Height: | 900 mm |
| Square Shaft Size: | 40x40x800 mm |
| Round Wire Diameter: | Ø0.3 ~ 4.0 mm |
| Maximum Flat Wire Size: | 3x10 mm |
| Maximum Finished Coil OD.: | 400 mm |
| Maximum Each Coil Length: | 150 mm |
| Winding Motor Power: | 4kw |
| Winding Speed: | 0 ~ 200 rpm |
| Winding Speed Regulation: | stepless speed regulation |
| Control system: | PLC |
| Minimum Spread Pitch: | 0.01 mm |
| Counting Mode: | 5-digit counting, |
| Maximum Turns Number Preset: | 9999.9 |
Fig 1: Transformer coil winding machine ZPX150-3's full view
Fig 2:Transformer coil winding machine ZPX150-3's back view
