5 Ton Cross-Platform Transport Vehicles Production Line Transfer Cart

5 ton cross-platform transport vehicles Production line Transfer Cart

^{Type selection of cross-platform vehicles depends on the customer's operating environment, running length and availability.}

^{Other platform vehicles traffic and other on-site impact as well as customer expectations to achieve the state of use for comprehensive Quality considerations. In order to facilitate customer selection, we provide the following models for reference:}

^{Towline power supply type}

^{Short running distance, short total use time, can provide towing}

^{Chain protection.}

^{Cable Drum/Low Voltage Track Type for Overpass transfer vehicles}

^{200 m (> running distance (> 20 m), total usage}

^{For a long time, when there are other traffic conditions}

^{Low-pressure track electric transfer vehicles}

^{Diesel Generator Drive Type}

^{Running distance is more than 200 meters.}

^{In addition, the trackless car can also be powered by cable, while choosing, the customer needs}

5 ton cross-platform transport vehicles Production line Transfer Cart

^{Production process of transfer vehicle}

^{NC cutting: the steel plate is transported from the warehouse to the NC cutting workshop for cutting.}

^{Pre assembly: workers assemble the cut steel plates together according to the design drawings.}

^{Welding: after the preliminary assembly of the steel plate is completed, the automatic welding machine shall be used for welding.}

^{Post welding treatment: test, polish and deburr the welding section after welding.}

^{Post weld treatment to eliminate welding stress.}

^{Primer spraying: transport the treated structural parts to the paint booth for primer spraying.}

^{The primer is mainly composed of zinc rich epoxy antirust paint.}

^{Assembly: after spraying primer, assemble structural components with wheels, motors, gearboxes, etc.}

^{Paint treatment: transport the assembled vehicle to the paint booth and check the integrity of the primer.}

^{Then paint it.}

^{Commissioning: after the commissioning of the electric control system of the paint spraying vehicle, the trolley shall be subject to no-load test before on load test.}

^{After inspection, transport the trolley to the storage area.}