Home Companies Torich International Limited

SAE J526 UNS G10080 / UNS G10100 Welded Low Carbon Steel Tubing Cold Drawn

Torich International Limited
Active Member

Contact Us

[China] country

Address: Daqiao Developing Zone Haiyan,Zhejiang Province,China

Contact name:Richard

Inquir Now

Torich International Limited

SAE J526 UNS G10080 / UNS G10100 Welded Low Carbon Steel Tubing Cold Drawn

Country/Region china
City & Province zhejiang
Categories Metal Casting Machinery
InquireNow

Product Details

SAE J526 UNS G10080 or UNS G10100 Welded Low-Carbon Steel Tubing
SAE J526 welded single-wall low-carbon steel tubing intended for general automotive,refrigeration,hydraulic, and other similar applications requiring tubing of a quality suitable for bending,flaring,beading,forming,and brazing.


Material: SAE J526.
Wall thickness:0.5-15mm
Diameter: 1-100mm
Length :12Max Upon request
Application :General automotive,refrigeration,hydraulic, and other similar applications
Grade: UNS G10080 or UNS G10100
Produce method:The tubing shall be made from a single strip of steel shaped into a tubular form,the edges of which are joined and sealed by a suitable welding process.After welding,the bead shall be removed from the outside to provide a smooth round surface and the tubing shall be processed in such a manner as to produce a finished product which meet all requirements of this document.Typically this type of tubing is available in both coiled and straight condition.Straightness requirements should be agreed upon between supplier and purchasing .
 

Steel Grade and Chemical Compositions
Steel GradeCSiMnPS
maxmaxmaxmaxmax
UNS G100800.10.07-0.60.30-0.500.030.05
UNS G101000.08-0.130.07-0.60.30-0.600.030.05

 

MECHANICAL REQUIREMENTS
PropertiesValues
Yield Strength, min (0.2% offset)170 MPa
Tensile Strength, min290 MPa
Elongation in 50 mm14% min
Hardness (Rockwell 30 T scale), max65

 

TUBING DIMENSIONS AND TOLERANCES

Dash

Size

Nominal

Tubing

OD

mm

Outside

Diameter (2)

Basic

mm

Outside

Diameter (2)

Tolerance

±mm

Wall

Thickness (3)(4)

basic

mm

Wall

Thickness (3)

Tolerance

±mm

−23.183.180.050.640.13
−34.764.760.080.710.13
−46.356.350.080.710.08
−57.947.920.080.710.08
−69.539.530.080.710.08
−711.1111.130.100.760.08
−812.7012.700.100.760.08
−812.7012.700.100.890.09
−914.2914.270.100.760.08
−1015.8815.880.100.890.09

1. Other sizes may be specified by agreement between the supplier and the user.
2. The actual outside diameter shall be the average of the maximum and minimum
outside diameters as determined at any one cross section through the tubing.
3. The tolerances listed represent the maximum permissible deviation at any point.
4. For intermediate wall thickness, the tolerance for the next heavier wall thickness
shall apply.
Relevant standard :SAE J1677-Tests and procedures of SAE Low-Carbon steel and Copper Nickel Tubing
SAE J409-Product Analysis –Premissible Variations from Specified Chemical Analysis of a Heat or Cast of steel

Hot Products

ASME SA213 T9, T11, T22, T91 Alloy Steel Seamless Boiler Tube Torich is a manufacture of T9, T11, ...
Product Name:Cold Drawn Seamless Rifled Pipe Heat Exchanger Tubes Material Carbon steel,Alloy steel ...
Product Name:OD63.5XWT13.5 Rifled Pipe Heat Exchanger Tubes Material Carbon steel,Alloy steel Od: 21...
EN10216-2 25CrMo4 10CrMo9-10 Seamless Steel Tubes for Pressure Purposes TORICH with more than 20 ...
12mm 24mm DOM Drawn Over Mandrel Cold Drawn Seamless Mechanical Round Steel Tubing TORICH is a ...
SAE J524 Cold Drawn Seamless Steel Tubing for Precision and Vehicle Applications Quick Detail: ...