Active Member
|
[China]
Address: No. 343, ShenQingLi,JiMei District,Xiamen City,FuJian Pro.
Contact name:vivian
Xiamen MuRuJia Trade Co.,LTD |
|
|
The wall row, the toilet drain pipe, the wall row to row pipe to take over the PP elbow wall toilet accessories.
Model: S - 101
Name: the wall platoon is changed to the joint Waste pipe
Material: PP
Specification: for aperture 102 plus or minus 5mm I.D.
| Name: | Sewage pipe bending |
| Type: | S-101 |
| Brand: | San-Tide |
| Usage: | Wall row |
| Origin: | Chian xiamen |
| Specifications: | Use for soil pipe 102±5mm l.D |
| Material: | PP |
| Cross-border sources: | no |
| Installation method: | Installed directly |
| Specifications: | 4 inches |
| Function: | Wall row |
Wall row:
Toilet drain pipe installation -- discharge mode.
The back row is also called the wall row or the horizontal row, according to the literal meaning can be known its discharge direction.In the back seat of the toilet, you should consider the height of the outlet center from the ground, which is generally 180mm.The bottom row is also called ground or vertical, as the name implies, refers to the toilet on the ground.In the lower flush type of toilet, you should pay attention to the distance from the center of the discharge outlet to the wall. The distance between the discharge outlet and the wall is divided into 400mm,305mm and 200mm.
Installation of toilet drain pipe - installation method introduction.
Observe the site to confirm the purchase of accessories and other additional tools.(duct tape is not very practical) prepare tools and materials.Prepare the scene, flush the toilet, cover the toilet, and place the old clothes on the toilet seat.It is very important to inform your users upstairs, and do not use toilet flushing during this period.Otherwise, when you're buried in the pipe, you're not.To remove the old pipe, remove the binding fixture on both sides first, and use pliers, which are usually twisted with wire.And then the tube is taken down, and the general plastic is old, it's not elastic, but it's brittle, it's just straight off.Processing interface edge, mainly is the interface, the aging rubber skin adhesion edge, forming thickness, not knocking out the new pipe can not enter.Then the two sides of the interface are smeared with vaseline.Otherwise, it has rust on it, and it is very difficult for the casing.Used clothes can be used to wipe hands.Casing, not to say, hard work, skill.Notice, first of all the fixed iron trap in the rubber hose mouth, otherwise, after the connection, will not be able to take.Basically a squat down on the toilet, clutching its very lewd posture.So it's necessary to have the old clothes on, or the toilet will be sore.Fix, pick up the pieces, and try the water.
