Hebei Tobee Group Co.,Limited |
|
Slurry pump parts,slurry pump spares are an unavoidable cost associated with operating centrifugal slurry pumps, the primary slurry pump parts included impeller, volute, frame plate liner insert, throatbush and bearing assembly etc., TOBEE® provides replacement parts for pump spare parts and stock a range of slurry pump wetted end parts which have been developed for abrasive applications in mines, quarries, sand and gravel etc.
The Main Parts for Slurry pump parts,slurry pump spares:
• Bearing assembly - A large diameter shaft with short overhang
minimizes deflection and contributes to long bearing life. Only
four through bolts are required to hold the cartridge type housing
in the frame.
• Liners - Easily replaceable liners are bolted, not glued, to the
casing for positive attachment and ease of maintenance. Hard metal
liners are completely interchangeable with pressure molded
elastomers. Elastomer seal rings back all liner joints.
• Casing - Casing halves of cast or ductile iron with external
reinforcing ribs provide high operating pressure capabilities and
an extra measure of safety.
• Impeller - front and rear shrouds have pump out vanes that reduce
recirculation and seal contamination. Hard metal and molded
elastomer impellers are complete interchangeable. Cast in impeller
threads require no inserts or nuts. High efficiency and high head
designs are also available.
• Throatbush - Wear is reduced and maintenance simplified by the
use of tapered mating faces to allow positive accurate alignment
during assembly and simple removal.
Slurry pump parts,slurry pump spares Reference Photos:
Slurry pump parts,slurry pump spares Materials Description:
Metal Slurry Pump Parts:
• KmTBCr27(Ultralloys®) is a wear resistant white cast iron that
offers excellent performance under erosive conditions. The alloy
can be effectively used in a wide range of slurry types. The high
wear resistance of KmTBCr27 alloy is provided by the presence of
hard carbides in the microstructure. KmTBCr27 Alloy is particularly
suited to mild acidic duties where erosion resistance is required.
• KmTBCr28(Extralloys®) is martensitic white iron with moderate
erosion resistance.It has the main elements of Chrome 28%, low
Carbon with hardness of 430 in Brinell, KmTBCr28 is a corrosion
resistant white iron suitable for low PH corrosion duties, where
erosive wear is also a problem.
• KmTBCr35(Hyperalloys®) is a premium erosion/corrosion alloy, The main elements of Chrome is 35-45%, low Carbon with hardness of 450 in Brinell. KmTBCr35 Alloy is suitable for phosphoric acid duties, FGD duties, sulphuric acid , and other moderately corrosive applications.
* SPECIAL NOTES: Ultralloys®, Extralloys® & Hyperalloys® are the registered trademark of TOBEE PUMP CO.,
• RU08 is a black natural rubber, of low to medium hardness. RU08 is used for impellers where superior erosive resistance is required in fine particle slurries.
• RU26 is a black, soft natural rubber. RU26 is used for lines where superior erosion resistance to all other materials in fine particle slurry applications.
• RU33 is a premium grade black natural rubber of low hardness and is used for cyclone and pump liners and impellers where its superior physical properties give increased cut resistance to hard, sharp slurries.
• RU55 is premium grade black natural rubber, it is suitable for severe erosive fine particle slurries.
Polyurethane Slurry Pump Parts:
• PU01 is an erosion resistant material that performs well in elastomer applications where 'tramp' is a problem. This is attributed to the high tear and tensile strength of PU01. However, its general erosion resistance is inferior to that of natural rubber.
Customized Slurry Pump Parts:
Tobee® Pump is always making continuous optimization of materials like Cast steel, EPDM, Hypalon, Hastelloy, CD4MCu, , Fluoroplastic, Ceramic, Bronze, Titanium, Aluminum and other anti-abrasive & corosive materials for various applications.
Tobee® Slurry Pump Parts widely used in Mining, Mineral Processing, Paper pulp, Sands, Gravels, Dredging, Coal Prep, Cyclone Feeds, Chemical Slurry Service, Tailings, Aggregate Processing, Ash Handling, Fine Primary Mill Grinding, Secondary Grinding, Iron Ore, Cooper, Oil field, Diamond, Alumina, Coal, Gold, Silver, Cement, Lead&zinc, Asbestos, Kaolin, Phosphorite, Bauxite, Potash, Mineral sands, Steel, Palm, Sugar, Steeloxyde, Chemical fertilizer, Molybdenum, Tin, Titanium, Power, FGD, Sea water, Food Processing, Cracking Operations, Pipeline Transport, High Velocity Hydraulic Transport,Food Processing, Explosive Sludge In Metal Smelting, River And Pond, Heavy Refuse Removal, Continuous (Snore) Sump Pump Operation, Abrasive Slurries, High Density Slurries, Large Particle Slurries, Sump Drainage, Wash down, Floor Drainage, Mixing, Frac Sand Blending, Tobacco, Construction, City Sewage, Industrial Processing etc.
Note:
* Tobee® is a registered trademark and does not represent or is not
in any way affiliated with ® of Weir Minerals Group. All
names,numbers, symbols and descriptions are used for reference
purpose only and do not imply that any pumps or parts listed is the
product of Pumps.
* Tobee® slurry pump spare parts are only interchangeable with ®
slurry pump spare parts.
* This document is the property of Tobee® Pump and can be neither
reproduced nor disclosed to a third party without a written
authorization.