Hebei Tobee Group Co.,Limited |
|
Rubber Slurry Pump Parts are great wear resistance and corrosion resistance, usually used
for acid working conditions. As a China-based slurry pump parts
manufacturer, Tobee® provide a broad range of rubber slurry pump impellers, liners and
plates, including froth pump parts, medium/light duty slurry pump parts, sump pump parts, FGD(flue gas desulfurization) pump parts and
customized impellers.
The Main Parts for Rubber Slurry Pump Parts :
Liners - Easily replaceable liners are bolted, not glued, to the casing for positive attachment and ease of maintenance. Hard metal liners are completely interchangeable with pressure molded elastomers. Elastomer seal rings back all liner joints.
Impeller - front and rear shrouds have pump out vanes that reduce recirculation and seal contamination. Hard metal and molded elastomer impellers are complete interchangeable. Cast in impeller threads require no inserts or nuts. High efficiency and high head designs are also available.
Throatbush - Wear is reduced and maintenance simplified by the use of tapered mating faces to allow positive accurate alignment during assembly and simple removal.
Rubber Slurry Pump Parts Reference Photos:
Rubber Slurry Pump Parts Materials Description:
Metal Slurry Pump Parts:
• KmTBCr27(Ultralloys®) is a wear resistant white cast iron that
offers excellent performance under erosive conditions. The alloy
can be effectively used in a wide range of slurry types. The high
wear resistance of KmTBCr27 alloy is provided by the presence of
hard carbides in the microstructure. KmTBCr27 Alloy is particularly
suited to mild acidic duties where erosion resistance is required.
• KmTBCr28(Extralloys®) is martensitic white iron with moderate
erosion resistance.It has the main elements of Chrome 28%, low
Carbon with hardness of 430 in Brinell, KmTBCr28 is a corrosion
resistant white iron suitable for low PH corrosion duties, where
erosive wear is also a problem.
• KmTBCr35(Hyperalloys®) is a premium erosion/corrosion alloy, The
main elements of Chrome is 35-45%, low Carbon with hardness of 450
in Brinell. KmTBCr35 Alloy is suitable for phosphoric acid duties,
FGD duties, sulphuric acid , and other moderately corrosive
applications.
* SPECIAL NOTES: Ultralloys®, Extralloys® & Hyperalloys® are
the registered trademark of TOBEE PUMP CO.,
Rubber Slurry Pump Parts:
• RU08 is a black natural rubber, of low to medium hardness. RU08
is used for impellers where superior erosive resistance is required
in fine particle slurries.
• RU26 is a black, soft natural rubber. RU26 is used for lines
where superior erosion resistance to all other materials in fine
particle slurry applications.
• RU33 is a premium grade black natural rubber of low hardness and
is used for cyclone and pump liners and impellers where its
superior physical properties give increased cut resistance to hard,
sharp slurries.
• RU55 is premium grade black natural rubber, it is suitable for
severe erosive fine particle slurries.
Polyurethane Slurry Pump Parts:
• PU01 is an erosion resistant material that performs well in
elastomer applications where 'tramp' is a problem. This is
attributed to the high tear and tensile strength of PU01. However,
its general erosion resistance is inferior to that of natural
rubber.
Customized Slurry Pump Parts:
Tobee® Pump is always making continuous optimization of materials
like Cast steel, EPDM, Hypalon, Hastelloy, CD4MCu, , Fluoroplastic,
Ceramic, Bronze, Titanium, Aluminum and other anti-abrasive &
corosive materials for various applications.
Tobee® Slurry Pump Parts widely used in Mining, Mineral Processing, Paper pulp, Sands,
Gravels, Dredging, Coal Prep, Cyclone Feeds, Chemical Slurry
Service, Tailings, Aggregate Processing, Ash Handling, Fine Primary
Mill Grinding, Secondary Grinding, Iron Ore, Cooper, Oil field,
Diamond, Alumina, Coal, Gold, Silver, Cement, Lead&zinc,
Asbestos, Kaolin, Phosphorite, Bauxite, Potash, Mineral sands,
Steel, Palm, Sugar, Steeloxyde, Chemical fertilizer, Molybdenum,
Tin, Titanium, Power, FGD, Sea water, Food Processing, Cracking
Operations, Pipeline Transport, High Velocity Hydraulic
Transport,Food Processing, Explosive Sludge In Metal Smelting,
River And Pond, Heavy Refuse Removal, Continuous (Snore) Sump Pump
Operation, Abrasive Slurries, High Density Slurries, Large Particle
Slurries, Sump Drainage, Wash down, Floor Drainage, Mixing, Frac
Sand Blending, Tobacco, Construction, City Sewage, Industrial
Processing etc.
Note:
* Tobee® is a registered trademark and does not represent or is not
in any way affiliated with ® of Weir Minerals Group. All
names,numbers, symbols and descriptions are used for reference
purpose only and do not imply that any pumps or parts listed is the
product of Pumps.
* Tobee® slurry pump spare parts are only interchangeable with ®
slurry pump spare parts.
* This document is the property of Tobee® Pump and can be neither
reproduced nor disclosed to a third party without a written
authorization.